Steerer Tube Swap Shop - shorter for longer! NO SALES!

[How-J]

Looking to swap a 1" ahead steerer tube for a 11/8" threaded if anyone has one?
Its off a RST Mozo Pro, steerer length is approx 210mm.
Required threaded steerer approx 160mm.

Cheers

 

[onandon]

Re:

I've got a lovely set of retro RST Mozi pro forks 1 1/8 , steerer is 210mm and I need something greater than 260mm if possible. Anything out there?

 

[nosequemedices]

I need a mag tube 21 threadless 200mm.
I have several of marzocchi, one of 250mm with 50mm threaded 1 1/8, and some more other dimensions.

 

[shinobi]

Re:

Hi
Anyone got a 1 1/8th pace steerer 210 ahead to swop for the same but in 180 mm ?
Cheers Paul

 

[CK256]

I have a Pace RC 35 1 1/8" steerer that's too short (about 190 mm crown to top about 225 total) I looking for one around 230 mm crown to top 265 total, this steerer is the single diameter type as the crown race sits on an adaptor in the crown anyone?

Thanks Ken

 

[SEANSTEPHENS]

I have a Pace RC 35 1 1/8" steerer that's too short (about 190 mm crown to top about 225 total) I looking for one around 230 mm crown to top 265 total, this steerer is the single diameter type as the crown race sits on an adaptor in the crown anyone?

Thanks Ken

I've got a 1 1/8" 230mm pace rc36 steerer crown to top and am looking for a 190mm steerer

interested in a straight swap?

sean

 

[Theeb]

Hi Sean, don't know if Ken got back to you but I'm interested in that...I've got a pair of RC36s with a 200mm ish steerer but need something a little bit longer....

 

[mrkawasaki]

Ooh... hopefully time to benefit from one of my better thread starters (not in the league of 'Where is Beatles band?' - but hey, 6 years and counting! ;-)).

In my recent shed renovations I found these stumpy items - anyone care to swap for similar crowns but leggier (over 160mm in any sizes; threaded or ahead)???

1 x Manitou single bolt style 1 1/8" x XXmm
1 x Manitou double bolt style 1 1/8th" x XXmm
1 x Rock Shox Judy 1 1/4" x XXmm
1 x Rock Shox Judy 1 1/8" x XXmm

I'll pay postage both ways within the UK and arrange bucket loads of karma!
Sizings to follow after lunch.

 

[SEANSTEPHENS]

Hi Sean, don't know if Ken got back to you but I'm interested in that...I've got a pair of RC36s with a 200mm ish steerer but need something a little bit longer....

Thanks or the pm, 200mm is still a bit too long. I don't really want to cut one when somebody else could use it but I will bare it in mind if I can't find a shorter one

Anybody else got a pace Threadless steerer between 180-190mm? I've got a 171mm and a 230mm to swap

Sean

 

[masha]

Re:

Nice long Amp Research F3 1" steerer/crown swap for shorter 1,1/18 threaded (150mm) or ahead (200mm)