Steerer Tube Swap Shop - shorter for longer! NO SALES!

Not a steerer, but I have a Pace crown shim that allows you to fit a 1" steerer in a 11/4" crown.

I'm looking for similar, but to allow fitment a 11/8" steerer in the same crown.
 
I need a Rock Shox Judy 1" thread less steer that is 175mm or longer.

I have for trade the following Rock Shox Judy steers:

1" threaded:

158mm long

1 1/8 thread less:

194mm long Steel

176mm long Alloy SL
197mm long Alloy SL.
 
Looking for a Rock Shox Judy SL alloy 1-1/8" threadless steerer of 200mm or longer.

I have for trade the following Judy steerers:
SL alloy 1-1/8" 190mm
XC steel 1-1/4" 194mm
 
Re:

I'm after a 1" threaded steerer that would fit a Pace crown. Needs to be about 165 to 170mm.

I have a few 1 1/8 threaded steerers to swap or a 1" ahead steerer for Pace that is 180 mm
 
Pace 1" Steerer tube swap, I have a 180mm threadless (not including steerer in crown), looking for a 220mm threadless.
 
Re:

I have a couple Judy steerers over 200mm both 1 1/8 from the SL models
1 is older bolt on to stanchions 242mm
1 is press on 210mm
I'll get some pics and measurements shortly

From the US though chaps
 

Attachments

  • 005.JPG
    005.JPG
    113.5 KB · Views: 670
  • 006.JPG
    006.JPG
    110.8 KB · Views: 670
  • 001.JPG
    001.JPG
    181.4 KB · Views: 670
Re:

I have two VGC Manitou fork steerer crowns.

First one is 1 1/4" wide x 198mm long, and threaded. Pic below.

The second is 1 1/8" wide x 150mm long, and threaded.

Will swap either (or both) for a VGC Manitou 1 1/8" and 190mm/200mm threaded / 230mm+ unthreaded (it's for a steel 19" Marin).

Appreciate your time.
 

Attachments

  • Screen Shot 2014-05-25 at 8.50.20 PM.png
    Screen Shot 2014-05-25 at 8.50.20 PM.png
    171.9 KB · Views: 606
Re:

Karma - 170mm long 1 1/8 steerer top 30mm is threaded, there's what looks like a crown race adaptor wedged on there, came with my RC30s but don't know if it's genuine Pace or another.
 
Back
Top