Spoke Length - M900 hubs

[wadsy]

Before I measure/calculate!...I was hoping someone could confirm spoke lengths for an M900/M230 wheel build?....hubs are 32H and 3 cross pattern.

This is what I have below!....



The data above is from a very handy on-line source I found listing all sorts of hubs and rims etc, but I've 'lost' my internet favourites, can anyone suggest the 'site?

I've got the M950 front in as couldn't find data for the M900, I think I read somewhere that they measure up the same :? ...anyone confirm that too please?

Cheers
wad

 

[kingroon]

http://bikefat.com/5-best-spoke-length-calculators/

I have used Damon Rinard's one in the past..

 

[FluffyChicken]

Re:

They're 267mm iirc.

For Shimano and similar hubs.

 

[wadsy]

http://bikefat.com/5-best-spoke-length-calculators/

I have used Damon Rinard's one in the past..

Thanks

 

[wadsy]

Re: Re:

They're 267mm iirc.

For Shimano and similar hubs.

Thanks

I've got 267mm for the front on my chart above, but 265/266mm for the rear.

Are you suggesting 267mm all round, or just the front?

Cheers

 

[FluffyChicken]

Re:

Didn't see the rear, the lengths are all fine. Probably get away with 268 on the 267 lengths too.

 

[wadsy]

Re: Re:

Didn't see the rear, the lengths are all fine. Probably get away with 268 on the 267 lengths too.

Ok, to confirm!... 32x 268mm for the front.

And 16x 265mm plus 16x 266mm for the rear.

Planning to use DT revs; hope I can find in 'odd' numbers! (ie 265mm)

Cheers

 

[FluffyChicken]

Re:

To confirm it is the original lengths you had. the extra mm was an alternative as the 267 is a fraction more to 268 wouldn't be a problem in reality.

But you mention Revs, these stretch a bit, like Sapims thin ones do (Sapim Laser, consider these too), so stick to the shorter version if you can.
iirc one of the companies recommends using 1mm shorter on their thin ones.

but stick to your original if you can and you'll be fine.


Now i'm on a bigger device, it is probably
https://leonard.io/edd/
you used.

 

[FluffyChicken]

Re:

check crc price and rose bikes, incl deliver.

then ebay as nidderdalecycles may have some of either.
also stick a post on here as there are one or two who sell them.

 

[wadsy]

Re:

Thanks for the replies and info FC

I've bought Revs from Rosebikes last time; good value, but they only do even numbers! ie 266/268 etc.

I'll check the others you suggest

Cheers