Some small Campy bits
- Thread starter yedi
- Start date
My camera (Cell phone) quality is not so good so pictures look accordingly...
Most of them are obvious, but anyway...
From left:
-Front ones; seat post bolts for road frame
-Back ones; these were in inner side on pedal cage in pedals with toe clips (in that side where toe clip was mounted). I believe that prevented shoe tip to stuck pedal cage when you slide foot in.
-5 set (3 per each) of cable quides for top tube. Before soldered ones where used they used these.
-Track bike cog
-Q/R for old record front hub (turned pin)
-Two type of pump heads for Silca Impero pumps
-Last ones must be clear
Most of them are obvious, but anyway...
From left:
-Front ones; seat post bolts for road frame
-Back ones; these were in inner side on pedal cage in pedals with toe clips (in that side where toe clip was mounted). I believe that prevented shoe tip to stuck pedal cage when you slide foot in.
-5 set (3 per each) of cable quides for top tube. Before soldered ones where used they used these.
-Track bike cog
-Q/R for old record front hub (turned pin)
-Two type of pump heads for Silca Impero pumps
-Last ones must be clear
