I bought this on here, 3 years ago. This is a link to the original advert:
viewtopic.php?f=2&t=320060
It was repainted by JonRock and not ridden until I built it up. I didn't use it all that much, so there are no scratches or dents, but there is some flaking around the cable entry holes, top of the seat tube and the dropouts. There is a little chainsuck damage visible through the paint that happened pre-repaint, but with cranks mounted it's not really noticeable.
A stuck seatpost was reamed out by hand by the previous owner. This did a little damage internally to the drive side seatstay where it joins the seat tube, but it was only a couple of mm. I filled it with some metal epoxy and filed it smooth for peace of mind, but there have never been any issues with the post slipping or any creaks or strange noises. I always rode the bike with the post well below the seatstay/seat tube intersection. There is a little debris in the seatstay that rattles about, but I never noticed this when riding, only when handling the bike.
It's a Klein 19", which measure 17.5" c to t with a 22" top tube. The MC1 is 135 and o rise, 580 wide. The BB spindle is 108 and titanium. All bearings and the internal cable guides are in great condition. The Klein seatpost and seat clamp bolt are included.
I'd like £1000, plus post. I'll ship it anywhere, but insist on tracked post.
Here's a pic of how it looked built:
and how it looks this evening:
viewtopic.php?f=2&t=320060
It was repainted by JonRock and not ridden until I built it up. I didn't use it all that much, so there are no scratches or dents, but there is some flaking around the cable entry holes, top of the seat tube and the dropouts. There is a little chainsuck damage visible through the paint that happened pre-repaint, but with cranks mounted it's not really noticeable.
A stuck seatpost was reamed out by hand by the previous owner. This did a little damage internally to the drive side seatstay where it joins the seat tube, but it was only a couple of mm. I filled it with some metal epoxy and filed it smooth for peace of mind, but there have never been any issues with the post slipping or any creaks or strange noises. I always rode the bike with the post well below the seatstay/seat tube intersection. There is a little debris in the seatstay that rattles about, but I never noticed this when riding, only when handling the bike.
It's a Klein 19", which measure 17.5" c to t with a 22" top tube. The MC1 is 135 and o rise, 580 wide. The BB spindle is 108 and titanium. All bearings and the internal cable guides are in great condition. The Klein seatpost and seat clamp bolt are included.
I'd like £1000, plus post. I'll ship it anywhere, but insist on tracked post.
Here's a pic of how it looked built:
and how it looks this evening: