Shimano STX or STX RC Chainring 22T

[RadNomad]

Hello, I have a similar problem, I need the 32 teeth middle ring on the 1995 FC-MC33, part number 1CT 3200 (no threads in the holes)

I have an inner 22T ring in nice condition from the same year if anyone wants to swap or so.

Maybe it'll work to replace the inner with a middleburn chainring if going singlespeed, but then you're stuck with 26T at max.

Have you seen this?
It's definately STX but i don't know if it's 1CM3200 or 1CT3200. I've closely examined it's form (teeth ramps, suages, markings etc) in direct comparison with the FC-MC34 on my '96 Kona (1CM3200) and it looks identical in every respect, but maybe the 1CM and 1CT look identical anyway except for the threaded holes? You could ask the seller if the holes are threaded or not.
http://www.ebay.co.uk/itm/370976002267? ... _361wt_904

 

[cherrybomb]

Right;

I've got three sets of middle & outer rings. I'll strip them down tomorrow and take some photos after I've given them I quick wipe down.

 

[konken]

Nice

Regarding the ebay auction it looks like two or three tooth are damaged/gone, but maybe it's just the picture (NOS stated).

Anyway, I like the cranks so a middle ring which is not completely worn down as the one I have now would be really great.

 

[RadNomad]

Nice

Regarding the ebay auction it looks like two or three tooth are damaged/gone, but maybe it's just the picture (NOS stated).

Anyway, I like the cranks so a middle ring which is not completely worn down as the one I have now would be really great.

The ring is NOS and in perfect condition, it is deliberately manufactured with a few shorter teeth to aid chain derailment (shifting).

 

[legrandefromage]

I have a few stx granny rings and inners that act as the spider - will look tonight

 

[cherrybomb]

right,

I've got three sets of outer & middle rings along with the correct spacers & chain ring bolts.

All look to be in good condition, they have signs of use but the teeth still look good.

 

[konken]

Nice!

I was not able to remove the crank yesterday so I need to get a longer allen wrench and a crank puller, is there any especially good one I should get?

 

[mr.bibendum]

Hmmm...

I found a pair of NOS 22T / 32T STX chainrings in chromica finish ( # 1CT2200
1CT3200 . These are supposed to fit FC-MC33 and FC-MC32 cranks.