Shimano LX / STX RC / XT Hope Parts General clear out

[Cinders]

All prices are UK Posted, Paypal Gift.

I'm also looking for a 9 speed top pull XT from mech 28.6mm low clamp, a Hope Mono Mini rear brake, Hope standard 5mm hose with fittings for front set up and a lowish rise handle bar in silver if you're looking to trade.

LX STI units and Mechs - £27 (may split if there's interest) Uesd but fair condition. SOLD
RD-M567 Rear Mech (some scratches)
ST M564 STI unit (7 speed but can be used as 8 apparenlty)
FD-M567 Front Mech 28.6 low clamp bottom pull

STX RC Mechs again used but fair condition

Front Mech 34.9 low clamp bottom pull £7.50
Rear mech RD MC38 = £7.50 SOLD

XT Front Hub £20

HB-M737 32 hole front hub, used for 1 year in 1996 not built since then, nice and smooth, no QR

Avid SD1.9 Levers and 2.0 V Brakes SOLD
Some scratches to RH lever , noodles included £12

Saddles

Viscount VRT with Titanium rails (not that light though!) £10
Titec Berserk (some small cuts to rear rh edge) £6

Hope Parts
Mono M4 180mm 5 bolt discs for Hope spiders (2 available) new unused £12 each SOLD
Mono Mini 160mm (centre bottom of pic) IS 6 bolt Moderate / heavy wear £5
Hope C2 165mm (bottom right of pic) IS 6 bolt 0 little wear £8
Old XC4 (closed pro lever type) 170mm (?) IS 6 bolt some wear £6
Old XC4 Caliper and Braided hose, used but I haven't used this so it's for spares £15

Other bits

Acor 30mm QR and 35mm QR 2.50 each
Kona Race light post - post is very rough, but happy to post the top fittings if someone needs them £5

 

[Cinders]

Additional pics

 

[TheElectronKid]

LX STI units and Mechs

I'd like the LX STI units and Mechs please.

PM sent

Cheers

 

[chrisv40]

Pm sent re Avid brakes.

 

[OldFatTi]

£5 for STX rear mech? It's for a super low-budget project!

 

[Carlos]

What model is the STX-RC rear mech?
I've been trying to hunt down the original 7spd but to no avail, now given up and OK with the later model 7spd! Still quite hard to find in decent nick though.
Sorry to jump in, but if it's the one I've been hunting for, then I'll pay full asking and probably find a mech for OldFatTi to use on a budget bike

 

[Cinders]

I'll confirm the spec of the Rear Mech tonight - I suspect it's the 8 speed version as it was ftted to an 8 speed marin from the factory (I'm guessing you need the RD-MC36 7 speed version?)

 

[Carlos]

Yep, I've been looking out for the MC33 but I don't think there are many around! So MC36 will do Even these are a little tricky. Gotta love a challenge though
Cheers

 

[Cinders]

The STX RC rear mech is an 8 speed RD MC38 so, OldFatTI you have PM..

 

[ringo]

PM incoming on Hope spider discs...