Hi all,
I have a load of seatposts for sale, mostly 27.2mm but with a few other sizes too.
All are available for collection from London N1 or I can post at cost.
27.2mm
Dura-Ace EX (1st Generation) - 200mm - £30
Good - Quite a few light marks above insertion point but they don't detract from the stunning looks. Some nice hand-drilled holes on the rear.
https://picasaweb.google.com/wayneblenkin/DuraAceEX1stGenSeatpost272mm
Campagnolo Nuovo Record 2-Bolt - £20
Fair - Looks a little weathered but it's actually not that bad, it's just quite dull in finish. Marked all the way up but relatively lightly.
https://picasaweb.google.com/wayneblenkin/CampagNuovoRecord272mm
SR Laparde - 200mm - £14
Good - Relatively light marks above insertion point.
https://picasaweb.google.com/wayneblenkin/SRLapradeGood
Kalloy SR Laprade lookalike - 230mm - £8
Good - lightly marked all the way up, minor and should polish out if you so wish.
https://picasaweb.google.com/wayneblenkin/KalloyFluted
Milremo - 200mm - £6
Poor - Badly marked all the way up, perfect beater seatpost.
https://picasaweb.google.com/wayneblenkin/Milremo272mm
Unknown Alloy - 300mm - £8
Good - Very lightly marked but you can barely tell.
https://picasaweb.google.com/wayneblenkin/AlloySeatpost272mm
27.0mm
Unknown Alloy - 206mm - £8
Fair - Lightly marked but fine. Nice anodised clamp bolts.
https://picasaweb.google.com/wayneblenkin/UnknownAlloyRedBolts
26.4mm
Campagnolo Aero (No-shield version) Chrous/Croce D'Aune - 210mm - £30
Good - Non-offensive marks above insertion point, the worst of which is on the rear of the Campy banding. See pics. Beautifully polished above the logo.
https://picasaweb.google.com/wayneblenkin/CampagAero264mm
26.0mm
ITM Fluted Silver/Black - 220mm - £12
Good - Marked a bit above insertion mark generally looks decent. Nice seatpost.
https://picasaweb.google.com/wayneblenkin/ITMBlackFluted260mm
25.2mm
USE Anodised blue - 220mm - £10
Fair - Anodising has been marked quite a bit, still nice at the top though. Shim takes it to 27.2mm but I'm not sure if I have one.
https://picasaweb.google.com/wayneblenkin/USEBlueSeatpost
I have a load of seatposts for sale, mostly 27.2mm but with a few other sizes too.
All are available for collection from London N1 or I can post at cost.
27.2mm
Dura-Ace EX (1st Generation) - 200mm - £30
Good - Quite a few light marks above insertion point but they don't detract from the stunning looks. Some nice hand-drilled holes on the rear.
https://picasaweb.google.com/wayneblenkin/DuraAceEX1stGenSeatpost272mm
Campagnolo Nuovo Record 2-Bolt - £20
Fair - Looks a little weathered but it's actually not that bad, it's just quite dull in finish. Marked all the way up but relatively lightly.
https://picasaweb.google.com/wayneblenkin/CampagNuovoRecord272mm
SR Laparde - 200mm - £14
Good - Relatively light marks above insertion point.
https://picasaweb.google.com/wayneblenkin/SRLapradeGood
Kalloy SR Laprade lookalike - 230mm - £8
Good - lightly marked all the way up, minor and should polish out if you so wish.
https://picasaweb.google.com/wayneblenkin/KalloyFluted
Milremo - 200mm - £6
Poor - Badly marked all the way up, perfect beater seatpost.
https://picasaweb.google.com/wayneblenkin/Milremo272mm
Unknown Alloy - 300mm - £8
Good - Very lightly marked but you can barely tell.
https://picasaweb.google.com/wayneblenkin/AlloySeatpost272mm
27.0mm
Unknown Alloy - 206mm - £8
Fair - Lightly marked but fine. Nice anodised clamp bolts.
https://picasaweb.google.com/wayneblenkin/UnknownAlloyRedBolts
26.4mm
Campagnolo Aero (No-shield version) Chrous/Croce D'Aune - 210mm - £30
Good - Non-offensive marks above insertion point, the worst of which is on the rear of the Campy banding. See pics. Beautifully polished above the logo.
https://picasaweb.google.com/wayneblenkin/CampagAero264mm
26.0mm
ITM Fluted Silver/Black - 220mm - £12
Good - Marked a bit above insertion mark generally looks decent. Nice seatpost.
https://picasaweb.google.com/wayneblenkin/ITMBlackFluted260mm
25.2mm
USE Anodised blue - 220mm - £10
Fair - Anodising has been marked quite a bit, still nice at the top though. Shim takes it to 27.2mm but I'm not sure if I have one.
https://picasaweb.google.com/wayneblenkin/USEBlueSeatpost