Lots of other projects and I’ve also got the Endorphin from the same year to finish…
Anyway, this was the second from top hard tail alloy race model offered by Scott in 97/98 and only difference in the top model was the components (XT).
Measures18.75inch from centre of bb to top of seat clamp.
Measured 17.25inch from centre of bb to top of seat tube.
I haven’t yet serviced or restored this so its a great easy project for someone who’s after a very capable weight weenie build!
Pretty much catalogue snd original spec with Kore finishing kit and Deore LX throughout.
Rock Shox Judy T2 up front which work fine.
Wheels are aftermarket i believe with formula front hub on Mavic rim and rear is Shimano parallax hub on Yak 19 rim.
Rides fine but would benefit from aservice and new cables.
If I don’t sell it I’d do a full rebuild and I know this has potential to be a fantastic lightweight retro x country race bike!
There are no dents to the frame but there is a few chips and scuffs that could easily be repaired with a good T cut, polish and touch in.
Looking to move this on to a good home as it deserves to stay with a retrobiker!
£199 collected from Hartlepool or
£225 inc postage to mainland UK…
NOW REDUCED BELOW!
link to catalogue…
https://www.scottmtb.cz/_data/scott-a-katalogy/katalog-scott-1998.pdf
Thanks
Andy
Anyway, this was the second from top hard tail alloy race model offered by Scott in 97/98 and only difference in the top model was the components (XT).
Measures18.75inch from centre of bb to top of seat clamp.
Measured 17.25inch from centre of bb to top of seat tube.
I haven’t yet serviced or restored this so its a great easy project for someone who’s after a very capable weight weenie build!
Pretty much catalogue snd original spec with Kore finishing kit and Deore LX throughout.
Rock Shox Judy T2 up front which work fine.
Wheels are aftermarket i believe with formula front hub on Mavic rim and rear is Shimano parallax hub on Yak 19 rim.
Rides fine but would benefit from aservice and new cables.
If I don’t sell it I’d do a full rebuild and I know this has potential to be a fantastic lightweight retro x country race bike!
There are no dents to the frame but there is a few chips and scuffs that could easily be repaired with a good T cut, polish and touch in.
Looking to move this on to a good home as it deserves to stay with a retrobiker!
£199 collected from Hartlepool or
£225 inc postage to mainland UK…
NOW REDUCED BELOW!
link to catalogue…
https://www.scottmtb.cz/_data/scott-a-katalogy/katalog-scott-1998.pdf
Thanks
Andy
Attachments
Last edited:
