darkbluecobra
Dirt Disciple
This is a retro porn from 1990. Unthreatened and first set up.
SAKAE Litage Rider in pearl black / neon yellow with 80ies decor - all in great condition. Sakae as the japanese frame builder has developed the press-fitted / bolted aluminium tubes technique. The pipes are bonded to inner sockets by thermal bonding which is a similar process to that on which the Titanal frames are based. The process was called "Litage".
The beautifully crafted frames (internal trains 1990) are famous and the Rider is unique. I've never seen one in that color combination before.
The frame has nearly no signs of use, only the storage is on the right rear end 4-5 small chips and on the top tube. 2 mm diameter. Tried to make it look as good in the pictures as possible.
The Rock Shox Quadra 10 suspension fork is also good in shot and fits perfectly to the frame.
The SAKAE Litage Rider is equipped with a contemporary Shimano XT/LX group from the 90s - at the crank a few traces of use, the levers and canti-brakes nearly as good as new - and clear, works like a charm, just like the first day.
Size: top tube middle/middle ca. 57 cm, seat tube middle bottom bracket / tube end ca. 52 cm See pictures
And equipment with:
Frames: Sakea Litage Rider - mother of pearl black / neon yellow with decoration
Fork: Rock Shox Quadra 10
Gear lever: Grip Shift X-Ray 8x/3x
Brakes: Shimano XT
Front derailleur: Shimano XT
Rear derailleur: Shimano XT
Crank: Shimano XT 3-speed 24-32-42 chainrings
wheels: LX hubs, Rigida rims in root spoke design - very cool
Saddle: Selle Transam Initial (second-hand)
Seat post: Ergotech aluminium
Stem: Sakae Pipe (New)
Handlebars: Zoom
Tyres: Panaracer
Pedals: Sakae
Asking for 777 Euro plus shipping.
thanks for watching and sharing.
BR
Gerald
SAKAE Litage Rider in pearl black / neon yellow with 80ies decor - all in great condition. Sakae as the japanese frame builder has developed the press-fitted / bolted aluminium tubes technique. The pipes are bonded to inner sockets by thermal bonding which is a similar process to that on which the Titanal frames are based. The process was called "Litage".
The beautifully crafted frames (internal trains 1990) are famous and the Rider is unique. I've never seen one in that color combination before.
The frame has nearly no signs of use, only the storage is on the right rear end 4-5 small chips and on the top tube. 2 mm diameter. Tried to make it look as good in the pictures as possible.
The Rock Shox Quadra 10 suspension fork is also good in shot and fits perfectly to the frame.
The SAKAE Litage Rider is equipped with a contemporary Shimano XT/LX group from the 90s - at the crank a few traces of use, the levers and canti-brakes nearly as good as new - and clear, works like a charm, just like the first day.
Size: top tube middle/middle ca. 57 cm, seat tube middle bottom bracket / tube end ca. 52 cm See pictures
And equipment with:
Frames: Sakea Litage Rider - mother of pearl black / neon yellow with decoration
Fork: Rock Shox Quadra 10
Gear lever: Grip Shift X-Ray 8x/3x
Brakes: Shimano XT
Front derailleur: Shimano XT
Rear derailleur: Shimano XT
Crank: Shimano XT 3-speed 24-32-42 chainrings
wheels: LX hubs, Rigida rims in root spoke design - very cool
Saddle: Selle Transam Initial (second-hand)
Seat post: Ergotech aluminium
Stem: Sakae Pipe (New)
Handlebars: Zoom
Tyres: Panaracer
Pedals: Sakae
Asking for 777 Euro plus shipping.
thanks for watching and sharing.
BR
Gerald
Attachments
-
s-l1600.webp640.9 KB · Views: 469
-
s-l1600 (1).webp345.5 KB · Views: 467
-
s-l1600 (2).webp330.9 KB · Views: 465
-
s-l1600 (3).webp488.5 KB · Views: 464
-
s-l1600 (4).webp444.7 KB · Views: 462
-
s-l1600 (5).webp274.5 KB · Views: 460
-
s-l1600 (6).webp298.9 KB · Views: 462
-
s-l1600 (7).webp236.9 KB · Views: 468