RS Judy XC 2001 - boxed, NOW SOLD

[LikeClockwork]

As above, see pics, steerer never been cut, just been out of box on display years ago in the shop.

Only problem I can see is the bolt/grommet out of the left hand leg is missing, perhaps lost or nicked when on display! (See pic)

NOW £80 posted in UK

 

[LikeClockwork]

'Need the money for another project' type evening bump....

 

[LikeClockwork]

Early morning bump...

 

[LikeClockwork]

Now reduced to £80 posted, must go or I'll be tempted to put them on something unworthy....

 

[Big_Al]

whats the diameter of the steerer? may be interest if it's 1" but suspect they're 1 1/8

 

[LikeClockwork]

Sorry, should have put that! They are 1 1/8" I'm afraid....

 

[LikeClockwork]

UK post only I'm afraid, I've looked at sending elsewhere and it gets too expensive....

 

[jskdog]

What is the missing bolt for?Could be interested in these

 

[LikeClockwork]

I have absolutely no idea!!

It just seems to be a bolt for the sake of it, a blanking bolt maybe? No expert on these,but they deffo never been used. The rebound adjuster is on the other side and is fine. If it was me I'd be tempted to just put an allen key bolt in there and forget about it...

 

[Dead Rats]

Any idea of the weight of these?

That missing bolt is concerning me, every fork I've ever rebuilt has a bolt underneath the leg which you unscrew 5 turns and knock lightly to allow you to remove the lowers. So I hazard to guess that there should be a bolt in there!

Al