klunkrider
Retro Guru
Bought these off of here for my GT build and used it briefly but have gone for something longer travel now.
They are in minty condition, there are some very light marks in the paint and stickers and a couple marks on the crown from fitting/removal of crown races but I doubt you'll find a nicer fork without going for a NOS one.
Internally they are just as good. Original elastomers in great nick (I'm around 15st and with the preload wound right up they were pretty good for me, probably bottomed them out a couple times but not too regularly).
Slight mark on bottom of non damper side stanchion but this is hidden deep within the fork when assembled so never seen and doesn't effect function.
I did blow the oil out of the damper but I've rebuilt it with fresh oil and it feels nicely dampened again. It's the original plastic cartridge, an upgrade to a metal cartridge would make these forks amazing and SRP are going to have a very reasonably priced kit available soon.
Rarer canti arch model, rubber boots with foam rings are included, adjusters are in really good condition, red anodising still nice and rich and the plastic not chewed up from use of incorrect tools.
I paid £110 plus shipping so I think they came to about £130 or £140, I'd like £110 to include cost of shipping. If you can pick up from Glasgow I'll knock a bit off.
They are in minty condition, there are some very light marks in the paint and stickers and a couple marks on the crown from fitting/removal of crown races but I doubt you'll find a nicer fork without going for a NOS one.
Internally they are just as good. Original elastomers in great nick (I'm around 15st and with the preload wound right up they were pretty good for me, probably bottomed them out a couple times but not too regularly).
Slight mark on bottom of non damper side stanchion but this is hidden deep within the fork when assembled so never seen and doesn't effect function.
I did blow the oil out of the damper but I've rebuilt it with fresh oil and it feels nicely dampened again. It's the original plastic cartridge, an upgrade to a metal cartridge would make these forks amazing and SRP are going to have a very reasonably priced kit available soon.
Rarer canti arch model, rubber boots with foam rings are included, adjusters are in really good condition, red anodising still nice and rich and the plastic not chewed up from use of incorrect tools.
I paid £110 plus shipping so I think they came to about £130 or £140, I'd like £110 to include cost of shipping. If you can pick up from Glasgow I'll knock a bit off.