Ritchey SuperLogic taper 107 BB NOS

[Yetidh9]

Hi
By publich demand I have got a few of the Richey BB's that I have sold before. I got to pay a bit more so have to raise may prise for them. Will able to send them to you for £35. They are the 107mm steel axel, single lockring type. PM me.

I got five (5).




SWAPS for
Platform pedals. Easton Flatboy, Easton Cully, Shimano DX, DMR v12.
1” Titec ahead titanium 110-120 stem
Ritchey WRC rims
Rockshox Boxxer 2000-2002 Electric red with god nitride stanctions

SOLD:
Xtr m900 crank arms. Arms in ok straight condition. Incuding extra drive side arm with logo partly intact. No rings. All threads ok. £35.
Ritchey Stem. Titanium colored-ish. 130mm, 1”, ahead. NOS +in orginal plastic bag. £20.
Ritchey Stem. Titanium Colored. 110mm, 1-1/8”, Ahead. Nos+ in orginal plastic bag. £20 [one sold. may be able to get my hands on one more]
Xtr m900 crankset. Original rings. Very good condition. Not NOS. But it is in a general very good used condition. £110.
m900 Front mesh. down pull. 28,4mm. good condition. £25
Sram 9.0 brakelevers. White. Nos. £20
Latex tubes. One NIB one NOS. £20 for both.
Flite TI brown special edition (110years). Good conditions £35
XT 8speed STI. No gear indicator. £35.
Pace 36 in red. Used but in fine condition. £15
M950 XTR v-brake rebuild set (one end). £15
Brakebooster. Just pay postage or free with other parts.
Machinetech Zeeroflex v-brake levers. Little use. Good condition. £70 or sensible offer.
RaceFace DH, 100mm, black. 1-1/8". £30
Avid speed deal ultimate levers. V-brake. Blades and clamps has been glass blasted (ready for anodizing or a more raw look). Slight bend to one lever. £65

 

[Yetidh9]

more pics

 

[Yetidh9]

more pics

 

[Wold Ranger]

Ritchey

Any 113 ones please?

 

[Yetidh9]

Re: Ritchey

Any 113 ones please?

I will try and see if I can source out some longer models... but for now only the 107mm. I will update when I know something (will take some weeks).
Thanks for asking!

 

[kiwideturin]

Are they ISO or JIS squares :?:

 

[Yetidh9]

Are they ISO or JIS squares :?:

Good question. I dont know for sure. But I suggest that they are JIS, as the crankset runs a little wider than on some other BB spindels. I have used them on Shimano cranksets (XT, XTR) and some others. The ends of the spindels are not so thin and do not run as long though the taper on the crank... This matchets good with informatinon on Sheldon Brown. He says that Ritchey may be JIS as well as Shimano. And to qoute him:

"In practice, you can very often get away with mixing these sizes, as long as you select a spindle length that gives the desired chainline." http://sheldonbrown.com/bbtaper.html

Hope this helps out. If you know a way of meassuring this please let me know. And if you facy a BB but are unasure if it will fit, I can just send you one and you can return it if it is wrong.
Cheers, jakob

 

[bonty98]

Hi,

would they work on 73 mm shells?

/J

 

[Yetidh9]

Hi,

would they work on 73 mm shells?

/J

Yes, if you take the double lockrings. Then you will be able to space them sideways as you wish. I can do you a set of the 107mm and a extra set of lockrings. Then you can use the fixed bearings as spares for your ajustable cups. PM me!

I will post some pics in order for you see how the lockrings would sit with 73mm shell spacing

 

[Yetidh9]

Pictures of the 68mm spindle with double lockrings expanded max... they can fit a 73mm shell.