Ritchey 30.9 post, GT stem, Onza trials cranks NOS, etc...

Re: Royce, jumps frame, Onza cranks, V brakes, BB's, much mo

Best I can manage is UN54, 73 x 118.... :?

There is allegedly a UN54 73 x 110 in my FSR that I will be swapping for something lighter, it's smooth as anything, but again, wrong length and model...
 
Re: Royce, jumps frame, Onza cranks, V brakes, BB's, much mo

Thanks anyway - looking for xt/xtr level although the new un55s do come with an alloy cup!
 
Re: Royce, jumps frame, Onza cranks, V brakes, BB's, much mo

Eh up, have you got any BBs in 68/113 flavour? As good spec as possible although bearing condition is the most important to me.
 
Re: Royce, jumps frame, Onza cranks, V brakes, BB's, much mo

Sorry, UN25 in 68 x 110 is closest I can get..... :facepalm:
 
Re: Royce, jumps frame, Onza cranks, V brakes, BB's, much mo

No worries, thanks for the reply but I'll pass.
 
Re: Royce, jumps frame, Onza cranks, V brakes, BB's, much mo

There's a couple of very cheap LP27 in 116mm, otherwise the only other 68 shell ones are 122mm.... :?
 
Re: Royce, jumps frame, Onza cranks, V brakes, BB's, much mo

LikeClockwork":2o1xi6e3 said:
There's a couple of very cheap LP27 in 116mm, otherwise the only other 68 shell ones are 122mm.... :?

What do you have in the 122mm variety then?

Spec and prices please, I need one in both 68 and 73 shell width.

Thanks, Chris.
 
Re: Royce, jumps frame, Onza cranks, V brakes, BB's, much mo

All UN54's, 2 in 68x122, and one in 73x122, all smooth but used. 2nd class post, £6 posted each? All 3 for £15.... :D
 
Re: Royce, jumps frame, Onza cranks, V brakes, BB's, much mo

LikeClockwork":2xvl8wab said:
All UN54's, 2 in 68x122, and one in 73x122, all smooth but used. 2nd class post, £6 posted each? All 3 for £15.... :D

If they've all got the left hand cups, I'll take them please.

I'll be on for a few more minutes tonight so if you pm me your paypal details asap I'll get you paid. Othewise would you hold them until tomorrow evening, I won't let you down :) .
 
Back
Top