Rigid, Straight Fork for 1994 Kona Kilauea Mountain Shock

[P_451]

Wanted: a rigid, straight cromoly fork for a 1994 Kona Kilauea Mountain Shock to replace the original Marzocchi XC51.

Surely the original rigid option, TB P2, would be great - the frames were identical - but it could be something different.

The axle-to-crown of the og sus fork was 416mm, so anything between 405 and 425mm a-c I would consider as possible. With canti/v-brake studs. The 1 1/8 inch steerer should be at least 210mm if threadless and 170mm if threaded.

To be shipped to Finland.

Thanks

 

[Dr-Zocchi]

Marzocchi XC500, XC600, XC700? They all came in different colours and silver, all are eloxal so you can polish it.

 

[P_451]

Cheers!

By that XC51 I was referring to the very original fork - which I don't have. In between, a previous owner has replaced the original one with MZ Comp (2004?) that has too long a travel/a-c for this frame and I would like to revive the old geo.

PS. Dr_Marzocchi - what a Marzocchi archive you have! In fact, I found the a-c of the original fork from there. Many thanks!

 

[Dr-Zocchi]

Do you want an original XC51?

The blue ones are lovely!

 

[P_451]

Thanks for the offer - they truly are lovely, and this is very tempting... but I would like to see first how this rigid fork thing pans out...