Rigid Forks or (Rockshox quadra 10) and FRONT MECH

[jmgk]

Need a front mech - 28.6 - top pull - to fit 46t chainwheel.

Ideally XTR or XT or LX, any age.

Need forks - ideally 400mm axle to crown for rigid but close enough will do, pref straight blade.

1 1/8" steerer. Don't mind if threaded or not. Don't need especially long- -let me know what you have!

If quadra 10 available, they can be mashed as long as the steerer and stanchions are good. Don't actually need the lower parts. Or compatible forks.

Cheers folks!

 

[jmgk]

NB: A suntour front mech would work with my setup!

 

[Marcus W]

forks

I have a nice set of quadra 21's yellow, 205mm steerer, soft springs. Any good?

 

[jmgk]

Nice! May I see?
What would persuade you to part with them? How much ought I to weigh to get the best out of soft springs?

So many questions! I will measure up tomorrow. I cut the head tube pretty short so they should fit.

 

[Vinevo]

Any good?

http://www.retrobike.co.uk/forum/viewto ... highlight=

Cheers, Ash.