Wanted Rear disc hub

[ishaw]

I've got a bike I want to sell, it's very nice aside from the rear hub which needs work (lower end DT Swiss model).

While I investigate bearings and options to fix it, thought I'd ask if anyone has anything going spare. Nothing exotic or expensive, something that goes with the spec which is mostly xt, with a hope xc hub.

6 bolt disc and rear qr fitment, non boost, 9 speed Shimano.

 

[dyna-ti]

Purple pror4 32h 135mm, 6 bolt QR fab condition, seen next to no use.. To you and only you £70+post(2nd class recorded)
The white on the rotor bolt holes is Michelin anti seize paste., easy cleaned off.

 

[ishaw]

Thanks but not looking to spend too much on this as it's a bike I'm selling, just trying to get it rideable and have no issues for next owner.

 

[Roly]

How many holes do you need ?

 

[ishaw]

I've got loads of holes, need a hub

32h I believe.

 

[dyna-ti]

Pass the mind bleach

 

[Splatter Paint]

I’ve done bearings in DT hubs. Pretty easy unless it is the one behind the pawl ring.

 

[ishaw]

I’ve done bearings in DT hubs. Pretty easy unless it is the one behind the pawl ring.

I've not checked yet, will confirm once I get the time. Arguably easier than a hub transplant I wager but....