Random MTB and some road parts (mainly MTB) NOW WITH PICS

[dmrbikerboy]

Giant ATX 990-960 95-97 linkage plates, these are the BETD plates that give 5 inches of rear travel. They fit the frame shown below:

Normal travel plates also available.

http://img.photobucket.com/albums/v83/s ... ATX990.jpg

Asking £10 as thats what i paid for them, got a few other atx frame parts (swingarm, chainstay, shock, spring, mech hanger)

AVID SD7 calipers and levers, supplied with front set of pads with aztec inserts (50%+ left), no pads rear. Avid noodles included £30 for the lot.

2 x Shimano DX singlespeed rear sprockets both 18tooth £4 inc postage

Shimano 2203 crank arms, 175mm length,5arm 130pcd £10

FSA powerpro crank arms, 175mm 5 arm 94 pcd £10

Ultegra 6600 series rear derailler, medium cage designed for tripple or wide range double, very little use, £20

Silver Middleburn DH rs7/rs8 spider, 110pcd 5 arm £10

Black Middleburn DH rs7/rs8 spider, 94pcd 5 arm £10

Middleburn DH 38t chainring, been used, but plenty of life left £10

Shimano Mega biopace chainrings (road) 130pcd (believe there 42/52t £10

Steel shimano inner ring (from 2203 chainset) in good condition £5

DMR laser cut stainless spider, adapts bmx 3 piece cranks to 5 arm 94pcd £7

DNA cnc aluminium brake adaptor plate for fitting v's on a canti only bike £7

PROFILE DESIGN century tri-bars, designed for 26.0 or 25.4mm bars £10

3 New used ultegra 6603 chainrings 52/42/32 middle and outer used slightly, inner never used (supplied with inner ring bolts) £30

Specialized suspension corrected rigids for 26" wheel, long steerer, ideal for singlespeed mtb conversion, 190mm steerer £20

Modern lugged Chrome plated 1inch steerer 700c, ideal for road bike,fixie bikes, accepts modern shimano brakes with recessed nut. long steerer £15

Z1 CR fork internals (100mm year 2000 version) cartridges, springs, stancions, the lot, except crown, These components are not interchangeable with other stancions due to different lower machining.

All prices are plus postage

Many thanks

 

[Lion]

Middleburn ring

Hi is the middleburn ring compact or standard drive? also is the spider for triple or single ring? thanks

 

[dmrbikerboy]

hi, sorry the middleburn ring is a DH, 38t, compact drive, 5 arm

 

[Lion]

Middleburn ring

Hi, have PM'd you

 

[Rampage]

Have you got a picture of the Middleburn spider?

 

[one-eyed_jim]

Is the Nitto Noodle bar measured centre-to-centre or outside-to-outside? If it's 46cm centre-to-centre, I'll take it please, pending a picture.

The Ultegra chainrings - 7700 is a Dura Ace model number. Could you clarify if these are DA 7700 or Ultegra (6500 or 6600 serial numbers)? The Dura Ace triple had an odd bolt circle for the smallest ring.

Thanks.

 

[dmrbikerboy]

Yes will post pictures of all items tomorow evening, I beleive the bars are center to center but will measure again tmrw.

Spider is the solid silver DH one, but with inner ring bolt holes. Il take a photo tmrw.

Sorry your correct, the ultegra chairings are from a 6603 chainset, so are 6600 rings. Bought a tripple, then slung a stainless chainring on there so these went spare.

Many thanks for all your replies.

 

[one-eyed_jim]

I'll pass on the Noodle, thanks. A mite narrow for my purposes.

 

[WayneO]

Hi - I'd like the Shimano 2203 cranks and the Middleburn 32T Ring as I assume they work together. If you have any bolts we could work out a price on those too.

I f the forks have a 1 inch steerer I'd also be keen for those

 

[dbmtb]

110BCD Middleburn spider please.