Raleigh RSP Titanium

[Fudd]

Thanks again for the comments. I never realised there was so much Raleigh love on here but after buying this and then noticing the size of the Dyna-Tech appreciation thread....

You have to get some more IRCs because they suit it perfectly

It's now wearing a pair of IRC Notos . Same amber walls as the Mythos but much softer rubber.... The old tyres were lethal; I went for a quick spin in the rain yesterday just to make sure everything was working as it should and was able to skid the front on tarmac by doing a track stand and holding the front brake and then the back would spin up. Those tyres are now in the bin....

...look for a set of UGLI forks and a USE post and RSP stem, Not keen on the Ugly Syncros parts.

I have my RC300 set up rigid and I like to have each of my bikes a bit different to each other so this one keeps the suspension forks. With regards to the Syncros, I think the posts are among the nicest ever made but each to their own. The stems can look a bit chubby on some frames, especially skinny steel ones but I think it looks ok with the fatter tubes of the RSP frame.

One last thing I'd add - just to finish it off.

A Genuine Raleigh round 'Herons Head' RSP badge!

I think I'll leave the frame stickerless but a RSP badge would certainly be the finishing touch. If anybody is reading this and has a spare one kicking around please contact me via pm

 

[neebsta]

That looks terrific! A great job, impressed with the build specifics of the frame.

 

[ibbz]

A quick question and help please.
What size Spindle on the BB for this bike??

 

[Twister]

I'm sure someone will correct me if I'm wrong but my understanding is that spindle or axle length is dictated by the crank model.

IIRC BB shell is 68mm though. Hope that's helpful.

 

[stumpjumper1990]

I'm sure someone will correct me if I'm wrong but my understanding is that spindle or axle length is dictated by the crank model.

No need to correct! Length of axle depens on the crank. Here's a list: http://sheldonbrown.com/bbsize.html

The shell (68 or 73mm normally) depends on the frame. Can be measured easily!

 

[ibbz]

Not really by the crank model solely , It is also dependent upon the chain stay width chain line tube size etc.
but i was Just wondering what size was used in this particular example
Or what size other owners of the rsp ti torus have used

 

[Fudd]

A quick question and help please.
What size Spindle on the BB for this bike??

I think I'm using a 109mm spindle. I did measure it when I rebuilt it but can't remember 100%. Have you found one of these frames?

 

[ibbz]

A quick question and help please.
What size Spindle on the BB for this bike??

I think I'm using a 109mm spindle. I did measure it when I rebuilt it but can't remember 100%. Have you found one of these frames?

Thanks man!
I bought one from a RB member here a week ago. It's a RSP 600 ti frame stripped of paint. Nice. With CK headset.
I've been getting some parts together.
Syncros forged cranks ringle rings. X lite L168 stem xlite bars with xlite bar plugs and x lite click on seatpost. X lite Kevlar saddle. Mavic 231 with xtr m900 hubs. That's all I have so far. X lited up
Need a BB but spindle lengths are confusing .

Another RB guy is selling the rsp 600 here and another one is selling an mtrax 450 elite Barrie Clark. They deserve to be bought and cherished

 

[ibbz]

This stunning example is on sale here

http://www.retrobike.co.uk/forum/viewto ... h+rsp+1999

£250 for frame or £300 with Sids

 

[Fudd]

Cool, You'll not be disappointed. I'm pretty impressed with mine and how it rides. I look forward to reading your build thread