- Feedback
- View
Hi Everyone
I purchased this off a good friend thinking it was an 82/84 model, was pleasantly surprised to find out it is an earlier 1980 model.
It came with a mish mash of parts and I would like to try to return it to as close to original spec as possible, without spending a fortune as I am a tight wad
Parts I think are original : Raleigh branded SR two bolt seatpost, Brown suede saddle marked made in italy (ISCA Selle?), Weinmann 605 brakes early type with matchng levers, Stem marked 'British Made' with Cinelli type wedge (GB?), Handlebars have no markings at all but are the direct fit type where the brake levers screw directly in to bosses on the bars, Tange headset the type with lots of flats on all the cups, Suntour clamp on cable guide, SR Raleigh branded L/H crank.
Parts that might be original : Suntour power gear levers, Suntour Cyclone GT rear mech, it came fitted with a Shimano 600 Arabesque front mech ( My friend says he has the original still and will look for it tomorrow ), it also came with miss-matched wheels 27x1-1/4 Weinmann front rim and Rigida or possibly Wolber rear rim both on Maillard hubs, not too worried about these as I have a pair of Weinmann Concave rims on Maillard hubs in the same size.
The one thing I know for certain is not correct is the Shimano 105 Golden arrow R/H crank.
I am also thinking of fitting Suntour bar end shifters period correct but more useable.
Any help on the spec will be gratefully accepted.
Cheers for looking.
Mark
I purchased this off a good friend thinking it was an 82/84 model, was pleasantly surprised to find out it is an earlier 1980 model.
It came with a mish mash of parts and I would like to try to return it to as close to original spec as possible, without spending a fortune as I am a tight wad
Parts I think are original : Raleigh branded SR two bolt seatpost, Brown suede saddle marked made in italy (ISCA Selle?), Weinmann 605 brakes early type with matchng levers, Stem marked 'British Made' with Cinelli type wedge (GB?), Handlebars have no markings at all but are the direct fit type where the brake levers screw directly in to bosses on the bars, Tange headset the type with lots of flats on all the cups, Suntour clamp on cable guide, SR Raleigh branded L/H crank.
Parts that might be original : Suntour power gear levers, Suntour Cyclone GT rear mech, it came fitted with a Shimano 600 Arabesque front mech ( My friend says he has the original still and will look for it tomorrow ), it also came with miss-matched wheels 27x1-1/4 Weinmann front rim and Rigida or possibly Wolber rear rim both on Maillard hubs, not too worried about these as I have a pair of Weinmann Concave rims on Maillard hubs in the same size.
The one thing I know for certain is not correct is the Shimano 105 Golden arrow R/H crank.
I am also thinking of fitting Suntour bar end shifters period correct but more useable.
Any help on the spec will be gratefully accepted.
Cheers for looking.
Mark