Dodgysprocket
Retro Newbie
Vintage Dynatech 700 Road Bike, Reynolds 653/2070, SBDU, Cinelli, Shimano 600 Ultegra
Collection Only from GL19 Gloucester Area
£200 for Complete Bike
Would also consider selling 'Frame Only' please PM if interested
A restored vintage Raleigh DynaTech 700 Road Bike with custom paint. New Wheel Set.
This is a late 80s/early 90s vintage road bike using innovative bonded technology (Reynolds 653/2070 steel tubing and aluminium cast lugs). A top-end Dynatech Model with a distinctive single rear wishbone seat stay.
According to the previous owner the bike received a custom paint job at M STEELE Cycles (of Dave Yates Fame) sometime in the early to mid 90s where it also acquired new (but not the original decals).
I did a full strip and restoration around 12 months ago managing to keep most of the original Shimano 600 Ultegra Groupset and sympathetically replacing parts that were worn. The paint work polished up nicely with just a few touch-ups required. The bike has only covered around 50 miles since the renovation and meets the spec for Eroica type rides. A lightweight and responsive road bike with tight clearances as was the norm back in the day (max tyre width would be 23c) .
Fully Serviced and ready to ride.
Spec
Frame: Raleigh Dynatech 700 - Reynolds 653/2070 Tubing 54.5cm Seat Tube Centre to Top
Wheels: New 700c Mach Rims with Joytech hubs
Tyres: New Schwalbe Lugano 700 x 19C
Tubes: new 700c Narrow Tubes
Chainset: Shimano 600 Ultegra with 52/42 rings
Front Mech: Shimano 600 Ultegra
Rear Mech: Shimano 600 Ultegra
Shifters: Shimano 600 Ultegra Downtube (7 spd Index for rear, friction for front)
Rear Sprockets: New Sunrace 7 speed freewheel 13-25
Chain: New KMC
Bars: Cinelli 65-42
Stem: Cinelli 1A 90mm
Seat Post: 27.2mm Micro Adjust
Saddle: Selle Italia Vintage Saddle
Brake Levers: new Dia Compe Non-Aero
Headset: Shimano 600 (Cleaned & Regreased)
Bottom Bracket: Shimano Square Taper Cartridge.
Brake Calipers: Unknown Dual Pivot similar to the original Shimano 600
Brake Pads: New Clarke CPS250 Elite
New Bar Tape and Cables
Weight: 10KG
Collection Only from GL19 Gloucester Area
£200 for Complete Bike
Would also consider selling 'Frame Only' please PM if interested
A restored vintage Raleigh DynaTech 700 Road Bike with custom paint. New Wheel Set.
This is a late 80s/early 90s vintage road bike using innovative bonded technology (Reynolds 653/2070 steel tubing and aluminium cast lugs). A top-end Dynatech Model with a distinctive single rear wishbone seat stay.
According to the previous owner the bike received a custom paint job at M STEELE Cycles (of Dave Yates Fame) sometime in the early to mid 90s where it also acquired new (but not the original decals).
I did a full strip and restoration around 12 months ago managing to keep most of the original Shimano 600 Ultegra Groupset and sympathetically replacing parts that were worn. The paint work polished up nicely with just a few touch-ups required. The bike has only covered around 50 miles since the renovation and meets the spec for Eroica type rides. A lightweight and responsive road bike with tight clearances as was the norm back in the day (max tyre width would be 23c) .
Fully Serviced and ready to ride.
Spec
Frame: Raleigh Dynatech 700 - Reynolds 653/2070 Tubing 54.5cm Seat Tube Centre to Top
Wheels: New 700c Mach Rims with Joytech hubs
Tyres: New Schwalbe Lugano 700 x 19C
Tubes: new 700c Narrow Tubes
Chainset: Shimano 600 Ultegra with 52/42 rings
Front Mech: Shimano 600 Ultegra
Rear Mech: Shimano 600 Ultegra
Shifters: Shimano 600 Ultegra Downtube (7 spd Index for rear, friction for front)
Rear Sprockets: New Sunrace 7 speed freewheel 13-25
Chain: New KMC
Bars: Cinelli 65-42
Stem: Cinelli 1A 90mm
Seat Post: 27.2mm Micro Adjust
Saddle: Selle Italia Vintage Saddle
Brake Levers: new Dia Compe Non-Aero
Headset: Shimano 600 (Cleaned & Regreased)
Bottom Bracket: Shimano Square Taper Cartridge.
Brake Calipers: Unknown Dual Pivot similar to the original Shimano 600
Brake Pads: New Clarke CPS250 Elite
New Bar Tape and Cables
Weight: 10KG
