Raleigh Dyna Tech appreciation and information thread
- Thread starter drystonepaul
- Start date
bikemeister2000
Retro Guru
Hi, The SB numbers mean it was a one off, not a catalogue model. Poss a show bike, more likely a customer made to measure.
chambo34
Retro Guru
Here's a link to the original post as some of the pictures don't appear to be showing up, iunlike other dynatechs with horizontal rear dropouts this has vertical rear dropouts and the seat stay top eye finishing is different to every other Dynatech I've seen.
viewtopic.php?f=12&t=205305&p=1550477&hilit=dynatech#p1550477
viewtopic.php?f=12&t=205305&p=1550477&hilit=dynatech#p1550477
Here are some more photos of the mis treated machine. I know its not a Ti or a USA version, but she still looks good with the long stem and top tube!
Is this a bonded frame or just standard lug and tube? Its just with it having the M-Trax label I thought I should rescue it!
The front and rear wheels dont match. The rear wheel is a Mavic SUP X517 but the front is an unbranded wide alloy. The Mavic rear has very large rear tyre which barely fits within the chainstays and some slack spokes.
The bike was partially serviced and jazzed up with some silver rattle can spray paint (with overspray on the rear hub, rear tyre, chain stay, seat stay and seat tube.
The brake levers were set up as per a serious rider (pointing at 45 degrees from horizontal)
It has STX cantis, cranks and chainrings. Im guessing the front and rear mech's are the same (no labels on them).
I haven't cleaned the hubs yet to be able to ID them.
I turned the bike over to photo the frame number and spotted the Specialized label on the underside of the bars - possible upgrade at some point?
On the bars we have Gripshift with Weinman plastic brake levers and original stem.
The seat post is a mystery and the sadddle is a Vuleta.
Overall a mish mash but not too bad!
Can anybody ID the hubs and the seat post?
Can anybody ID the year of manufacture?
Also Im looking for inspiration with this bike - any suggestions on paint work etc????....
Is this a bonded frame or just standard lug and tube? Its just with it having the M-Trax label I thought I should rescue it!
The front and rear wheels dont match. The rear wheel is a Mavic SUP X517 but the front is an unbranded wide alloy. The Mavic rear has very large rear tyre which barely fits within the chainstays and some slack spokes.
The bike was partially serviced and jazzed up with some silver rattle can spray paint (with overspray on the rear hub, rear tyre, chain stay, seat stay and seat tube.
The brake levers were set up as per a serious rider (pointing at 45 degrees from horizontal)
It has STX cantis, cranks and chainrings. Im guessing the front and rear mech's are the same (no labels on them).
I haven't cleaned the hubs yet to be able to ID them.
I turned the bike over to photo the frame number and spotted the Specialized label on the underside of the bars - possible upgrade at some point?
On the bars we have Gripshift with Weinman plastic brake levers and original stem.
The seat post is a mystery and the sadddle is a Vuleta.
Overall a mish mash but not too bad!
Can anybody ID the hubs and the seat post?
Can anybody ID the year of manufacture?
Also Im looking for inspiration with this bike - any suggestions on paint work etc????....
Just finished my build, a dyna-tech racing titanium frame (IMI build). Anyone know what model this actually is as there seem to be various options it could be, just not sure which one it is officially.
Link to my build thread here: http://www.retrobike.co.uk/forum/viewto ... p;t=249381
A couple of pics too:
Link to my build thread here: http://www.retrobike.co.uk/forum/viewto ... p;t=249381
A couple of pics too:
Dynatechrider
Dirt Disciple
Hi ishaw,
Great build
. Looks like a frame build of 1995. Starting in 1995, Raleigh sold two differend kinds of cable routing, one for the Magura brakes which had a top routing, the other one had a cable routing like the Torus of 1994 for the cantilever brake. In gerneral the dropout was changed in 1995. The decals looks like the original early 1995. At the end of 1995 there was the sticker on the headtube changed to the standard Raleigh one. Please note the attached picture of the late 1995 torus with the Magura brake system.
Best regards from Mainhatten
Great build
. Looks like a frame build of 1995. Starting in 1995, Raleigh sold two differend kinds of cable routing, one for the Magura brakes which had a top routing, the other one had a cable routing like the Torus of 1994 for the cantilever brake. In gerneral the dropout was changed in 1995. The decals looks like the original early 1995. At the end of 1995 there was the sticker on the headtube changed to the standard Raleigh one. Please note the attached picture of the late 1995 torus with the Magura brake system.Best regards from Mainhatten
