Sorted Race Face long chainrings screws and spacers for I-Beam / Turbine cranks...

[freddok]

Hi All,

All is in the title... I'm after a set of long chainrings screws and spacers for RF I-Beam or Turbine cranks for the grannie ring.
If someone have them in his spare parts box and have no need, thanks to let me know...

Fred

 

[Carge]

Were these 15mm bolts?
How about these? https://fawkes-cycles.co.uk/specialites-ta-vega-carmina-15mm-triple-chainring-bolts-p19529
If they won't post to France I'll get them and post them on to you.

 

[freddok]

Were these 15mm bolts?
How about these? https://fawkes-cycles.co.uk/specialites-ta-vega-carmina-15mm-triple-chainring-bolts-p19529
If they won't post to France I'll get them and post them on to you.

Thanks !! I'll take a look..

 

[Carge]

I'll measure the ones I have and check for you. They are in a set of cranks and not for sale - sorry

 

[FluffyChicken]

16mm bolts, 8.30mm spacers

 

[freddok]

16mm bolts, 8.30mm spacers

Yes FluffyChicken . It's what I've measured on my Turbine crankset...

 

[mk one]

Someone on here makes the spacers if I remember correctly.

 

[freddok]

@Carge for info, spacers on Specialités TA kit are 6mm, so too thin...

 

[Carge]

You beggars - I've just had a cold, damp walk to the workshop
I concur - 16mm and 8.3mm
I don't have the TA ones - I have a bag labelled "15mm Ti Chainring bolts - possibly RaceFace" that I spotted yesterday looking for some other stuff. The ones actually in my turbines are 16mm with 8.3mm spacers.

 

[FluffyChicken]

You beggars - I've just had a cold, damp walk to the workshop
I concur - 16mm and 8.3mm
I don't have the TA ones - I have a bag labelled "15mm Ti Chainring bolts - possibly RaceFace" that I spotted yesterday looking for some other stuff. The ones actually in my turbines are 16mm with 8.3mm spacers.

oh, I just read the installation instructions that tell you.
Nice and warm, dry and with a cup of coffee.