Race Face - advice needed!

[StealthDJ]

Hi folks,

I've aquired a set of race face turbines which I'm having a slight issues with - they came bare, so there's no spacers/bolts for the granny ring.

I've rung a few dealers and the UK importer, but no-one has any and no-one knows what size they should be.

Can anyone here possibly measure or tell me off-hand what size they are? Or of course, if anyone has a spare set lying about that they'd happily part with...

Tony

 

[suburbanreuben]

They look to be about 8.2mm thick x 12mm diameter.

 

[StealthDJ]

Cheers - now to try and find some.

The only local bike shop that has any that size in stock..... has *3* of them. Oh well...

Tony

 

[RockiMtn]

my experience with this topic here:

http://www.retrobike.co.uk/forum/viewtopic.php?t=84403

 

[StealthDJ]

Thanks - I did search, but obviously with not quite the right criteria

So basically, I'm going to have a hard time getting them :? Seems strange, cos I now know Kooka cranks use the same spacers and having looked at my flatmate's cook bros cranks, they do too - you'd think *someone* would do them... (In the UK, that is)

Tony

 

[StealthDJ]

Okay, to follow up on my own post, if anyone else ever finds themselves in the same position, this lot seem to have them listed in the UK:

http://activesport.co.uk/shop/article_2 ... 202.0.6%26

Was beginning to think I was going to have to get them made...