Quill stem handlebars

Trailblazer

Retro Newbie
Hi,

Is there such as integrated bullmoose quill stem handlebars single unit but in 25.4mm quill. I can only seem to find thinner ones.
Follow up question, moto style mtb bars like the NC-17 starbar with the extra cross brace. Can one, remove the cross brace, feed it through the quill and the re-attach the cross brace brackets from either side.

T.I.A.
 
When you say 25.4mm quill, I assume you mean to fit inside a 1 1/8" steerer? I doubt if there are many as Bullmoose were out of fashion by the mid-90s when such headsets were common.

Certainly the return to rise bars also came with cross-braces and indeed that was the way to fit them to stems with no removable faceplate.
 
24.5 is actually an inch, so I have an inch i internal steerer tube
Usually it´s the external diameter of the fork steerer which is stated when looking for a stem. A "1 inch stem" has 22.2mm quill, "1 1/8 inch stem" has 25.4mm quill.

As far as I know Bullmoose stem/bar combos were only available in 1" BITD, so 22.2mm quill (or sometimes 21.1mm/ old BMX standard). As stated above, there is a modern Nitto (B901) in 1 1/8" available, albeit with a more rounded design:

BL8A7271.webp
 
Back
Top