PROFLEX ELASTOMERS

[SLIM]

no probs jez , sorry for delay

work getiing in the way of business again

 

[gingerninjer]

Hi guys ,
new guy here desperately trying to get my 856 working again
front and rear elastomers like bricks..

Slim, how much u cahrging for your replacments?

anyone converted to coils >? noticed some on another site and still trying to find out the cost and suitabbility

cheers

 

[SLIM]

HI and welcome

£15.00 for a set ( front or rear )

got some new ones on order , these are white , softer

they are 70 shore hardness

the spring / coils are from rapid descent innovations in scotland

but he doesn`t have any in stock , £30 for a coil

and he charges £29 for a set of the same elastomers as i have

should have some in the next 2 weeks

let me know by PM

 

[SLIM]

for those of you who ordered the white elastomers

sorry for the delay , due to a mix up their end , a bit late in arriving

all cut and in the post later today , should be with you soon

and for those of you who didnt , WHY NOT , GET A PROFLEX

 

[Ziggy]

Eeeeexcellent :mrgreen:

 

[Ziggy]

Slim; received!

The hole through the centre of em's bigger than the originals though, so they're not tight on the shock. Reckon I need to find something to make up the space, or will they be ok? :?

 

[SLIM]

how much bigger ?

i guess its an ods

the cups will keep it in place , i cut them about 5 mm longer than they needed to be , so you can put more preload on them

not sure you could put anything in there ??

 

[Grimtech]

Elastomer request

I appear to have found people who can help me!

SLIM,
I have a Merlin Soft tail bike that runs a single yellow elastomer with GIRVIN written on the side. It has shriveled to less than 2/3 of its origianl lenght and as such the bike is un-usable.

It is approx 60mm long, and 50mm diamater with approx 10mm hole in it.

Would your elastomers be appropriate as from what i have read they seem to be used in pairs and mine is singular. I am not familier with the shore hardness/durometer rating.

Any advice greatfully recieved.

 

[retrobikeguy]

Re: Elastomer request

I have a Merlin Soft tail bike that runs a single yellow elastomer with GIRVIN written on the side. .

:shock: I wanna see a pictue of the bike

 

[SLIM]

the ones i have are 40 mm diameter and i can cut them to any length you need

the hole is 13 mm , and will be ok on your frame

the difference in the internal diameter is not a problem , unless it is BIG

the outside difference makes no difference

post a pic of the set up , does it have cups for instance ?

they are 70 shore hardness , how heavy are you ?

£15.00