Wanted Probably a massive long shot - White Industries freehub or most likely rear hub.

[benjabbi]

Was faffing about with my Ti Lite the other day and went to remove the cassette from the White Industries rear hub. It did not want to come off, a lot of levering and swearing later and after actually looking properly the cause became apparent. The freehub has split, cracked end to end along a spline. Causing it to open up and the cassette to become bastard tight.
Does anyone have either a freehub for an early White Industries Phantom hub or probably more likely a hub going spare.
Hole count and width unimportant as long as the freehub is in good usable condition.
Thanks, Ben.