Peugeot Perthus Pro refurbishment, opinions needed on design
- Thread starter mAdam
- Start date
mAdam
Old School Hero
FREEDOM! 
finally, we've managed to saw through the bars & escaped from prison.
The seatpost was completely welded into the seat tube! After cuting through the post and clamping it in the vice to free it, the post fractured, and started to fall apart. Rather than apply any adddtional force or twisting, i decided that i enjoyed the first cut so much, i'd cut it again! :x
Thankfully it eventually came out, but not without a good fight!
Now i have to start on the bottom bracket! The plastic cup (great idea someone at Shimano :roll is so well stuck that the tool simply stripped the teeth off....so it looks like the Pug will have to have another operation :x
finally, we've managed to saw through the bars & escaped from prison.
The seatpost was completely welded into the seat tube! After cuting through the post and clamping it in the vice to free it, the post fractured, and started to fall apart.
Rather than apply any adddtional force or twisting, i decided that i enjoyed the first cut so much, i'd cut it again! :x Thankfully it eventually came out, but not without a good fight!
Now i have to start on the bottom bracket!
The plastic cup (great idea someone at Shimano :roll is so well stuck that the tool simply stripped the teeth off....so it looks like the Pug will have to have another operation :x
531 pro
rBotM Winner
operation
Those simplex seatposts are pretty thick aren't they! Good job with that. What have you got in mind for getting the BB out? You could try melting the plastic threaded section using a soldering iron or small blow torch (like those one's you get for Creme Brule's!). Bodgetastic but with care it can be enough to muller it sufficiently to be able to lever and bash it out of the BB shell. Either way its a ball ache...
Those simplex seatposts are pretty thick aren't they! Good job with that. What have you got in mind for getting the BB out? You could try melting the plastic threaded section using a soldering iron or small blow torch (like those one's you get for Creme Brule's!). Bodgetastic but with care it can be enough to muller it sufficiently to be able to lever and bash it out of the BB shell. Either way its a ball ache...
mAdam
Old School Hero
I did indeed, stumbled across the advert a week or so ago, it had been up for sale for over a month, so it helped (together with the stuck seatpost etc. :x ) knock him down in price.
It's become a bit of a battle, me and the Peugeot, i've now got a stuck bottom bracket :x Its not going down without a fight, but i'm really determined now to get it totally stripped and refurbished!
It's become a bit of a battle, me and the Peugeot, i've now got a stuck bottom bracket :x Its not going down without a fight, but i'm really determined now to get it totally stripped and refurbished!
mAdam
Old School Hero
Progress has been slow recently, the bottom bracket is still stuck (welded) in the frame :x gentle persuasion moves up a gear or two this weekend :twisted:
On a positive note, the forks are free with incident .....
....and i have loads of 600 parts (Cheers Greg) to make up a complete groupset.
Just need a seat post & bottom bracket now :roll:
On a positive note, the forks are free with incident
.....
....and i have loads of 600 parts (Cheers Greg) to make up a complete groupset.
Just need a seat post & bottom bracket now :roll:
