help with identification of some parts..
Particulary, frame and stem, though I'll gladly hear the take on the hubs as well.
frame: some basso coral, though with unicrown forks, with "tube concept" decal, 130mm spacing, brake cable along the top tube, not concealed. Pictures:
http://www.flickr.com/photos/97878439@N ... 374775884/
also, the stem on the bike. Some anodized 3ttt, it has two bolts for the clamps, one for "expanding" the clamping area (which works with a small, probably 3mm allen key) and a larger bolt for tightening the clamp of the handlebar.
http://www.flickr.com/photos/97878439@N ... 8374775884
http://www.flickr.com/photos/97878439@N ... 8374775884
the hubs are supposed to be athenas,
http://www.flickr.com/photos/97878439@N ... 8374775884
http://www.flickr.com/photos/97878439@N06/10286116873/
though I only suppose this..
Anyone has greater knowledge on how to identify old campy parts which have no markings, I'd appreciate the input.
And also, if anyone has info what year that frame might be with it's small clearences, short-drop calipers, unicrown lugless forks.. I'd also be very-very grateful. And the stem is something which I don't really know what to think about. I'd be grateful if I'd know the weight, as I have the opportunity to buy ITM europa stem (263 grms, steel brazed) http://www.bringapiac.hu/hirdetes/43510 ... szar_1.htm for a very little amopunt of money (2000 huf is approx. 6 pounds or a little bit less..)
thank you. Just removing these 3ttt stems and weighing them would be a pain in the ass (removing brifters, hb tape to free the handlebar and then remove the stem, weigh it, install it again.. ohh : )
Particulary, frame and stem, though I'll gladly hear the take on the hubs as well.
frame: some basso coral, though with unicrown forks, with "tube concept" decal, 130mm spacing, brake cable along the top tube, not concealed. Pictures:
http://www.flickr.com/photos/97878439@N ... 374775884/
also, the stem on the bike. Some anodized 3ttt, it has two bolts for the clamps, one for "expanding" the clamping area (which works with a small, probably 3mm allen key) and a larger bolt for tightening the clamp of the handlebar.
http://www.flickr.com/photos/97878439@N ... 8374775884
http://www.flickr.com/photos/97878439@N ... 8374775884
the hubs are supposed to be athenas,
http://www.flickr.com/photos/97878439@N ... 8374775884
http://www.flickr.com/photos/97878439@N06/10286116873/
though I only suppose this..
Anyone has greater knowledge on how to identify old campy parts which have no markings, I'd appreciate the input.
And also, if anyone has info what year that frame might be with it's small clearences, short-drop calipers, unicrown lugless forks.. I'd also be very-very grateful. And the stem is something which I don't really know what to think about. I'd be grateful if I'd know the weight, as I have the opportunity to buy ITM europa stem (263 grms, steel brazed) http://www.bringapiac.hu/hirdetes/43510 ... szar_1.htm for a very little amopunt of money (2000 huf is approx. 6 pounds or a little bit less..)
thank you. Just removing these 3ttt stems and weighing them would be a pain in the ass (removing brifters, hb tape to free the handlebar and then remove the stem, weigh it, install it again.. ohh : )
