Pace, Ringle 29.4, Middleburn, X-Lite, Hope, King,REDUCED

[fattiman]

Pace RC35 MXCD 1 inch ahead - fantastic condition £115

Chris King 1 inch ahead in uber rare turquoise £sold

Hope front suspension hub on Mavic 117 Ceramic with TITANIUM spokes :shock: the lightest wheel i have EVER seen. £80 SOLD

Ringle H20 £30 complete with L bend

Dia-compe SS7 levers £10

X-Lite titanium bars £30

Middleburn RS3 with pace/goldtech rings - bolts etc £120

M900 XTR F/Mech Bottom pull 31.8 £20

Ringle Moby Post Pewter 29.4 cut down very short - clamp assembly can be used as spares if too short £15

Original CURVE canties X4 with PAUL moon Units (these brakes have carbon and TI hardware are extremely trick and light weight, they cost the same as Graftons when new!! £65

 

[Minifreak]

Re: Pace, Ringle, Middleburn, X-Lite, Hope, King

Interested in MXCD's what length is the steerer and how much threaded section? How well do these operate? Looking for something with a little more travel than my Kevlar RC35's and was looking for a Judy FSX but prefer Pace

 

[birdnestboy]

Re:

Dibs on the bars pending pics..

 

[fattiman]

Re: Pace, Ringle, Middleburn, X-Lite, Hope, King

Interested in MXCD's what length is the steerer and how much threaded section? How well do these operate? Looking for something with a little more travel than my Kevlar RC35's and was looking for a Judy FSX but prefer Pace

Will measure and get back to you.

 

[fattiman]

Re: Re:

Dibs on the bars pending pics..

Ok pics to follow

 

[fattiman]

Re:

Steerer is short at 4.5 inch it is non threaded, fork action is good and condition is at least 8/10 overall.

 

[Minifreak]

Re: Pace, Ringle, Middleburn, X-Lite, Hope, King

Can I dibs these forks pending a quick check once home from work please ? Do you know if the 1" steerer from an RC35 will fit this fork?

 

[fattiman]

Re:

sure thing. yes they share the same steerers i believe but just double check.

 

[fattiman]

Re:

pics of bars added and curve canties :shock:

Canties are the PROPER Curve ones, carbon spring covers etc, superb quality, slight fading evident.
Complete with kool stop pads and cable hangers (not pictured) believed to be original EARLY Paul Moon Units in turquoise. (The little etching on the far left cantie arm is a logo not "damage")
£75 posted for the lot

 

[Minifreak]

Re: Pace, Ringle, Middleburn, X-Lite, Hope, King

Can you tell me how much steerer length the crown takes up? Hoping it'll just be a straight swap over for the threaded ones on my RC35's to save the expense of another steerer