Pace rebuild - bullseye crankset wanted

[jono1984]

currently rebuilding my old rc100 (frame number 284)

the bullseye cranks are worn beyond repair, (spline has gone and shaft had cracked) so am after a new set..
the bearings (22mmx39mmx9mm) are a little worn and are non standard size so will need more of them too..
have emailed the bullseye guys on ebay, but no reply..

my second option is to turn up some adaptors to use a standard shimano hollow crank (24mm shaft), or a bmx type crank (19mm shaft).
would rather use the bullseyes. frame arrives back from restoration (at mercian) just after christmas. so hoping to have a solution ready to fit then.
any help gratefully appreciated..
jono

 

[jono1984]

still after some bullseye cranks.
dont think the bmx crank idea is going to work..
i have one good drive side arm, with a broken spindle, left arm cracked and prob thrown away, and a good spider.
so need a good spindle and left arm.
i have welding and turning machines here, but not spline grinding.
have two sets of new bearings (atv wheel bearings happen to be the same size)

jono

 

[Chris]

Hi mate,

sorry got no cranks but desperate for bearings.

Can you give me some info on the ones you have?

Cheers Chris.

 

[jonrock]

Hi,
Yes Im curious what are these bearings that fit?
J

 

[jono1984]

yep, bearings, i found here, http://www.buyatvsonline.com/ball-beari ... -8049.html

from the states unfortunatly, not found them in europe. so had to pay a bit of import duty..
bearings are sealed both sides. (not like original sheilded one side, open the other) so no need for all that grease.

please keep your eyes peeled for any cranks..

 

[rc300]

Fantastic bearing source at last!