uphillcursing2
Dirt Disciple
I have a set of Pace RC36 forks attached to my Klein Pulse. When going over a small drop or similar there is a rather large thump as the fork extends to its full travel position.
I am not sure which model they are as I did not buy then new, classified specials, but they have only what looks like a rebound damper adjustment on the top of the RHS leg. The damper does not seem to be doing anything and being as quick as Dr Watsons mate have guessed that the two things are not unrelated!
I have looked on the Pace website but the manuals on their do not give any obvious clues to disassembly. Although it does give a list of the oil type and amounts IF i knew which model they are. ( I can put up some photos if that will help)
Can anyone link to a strip down/rebuild procedure or offer a little advise. Fork English is a step too far as I am in Aus.
I am not sure which model they are as I did not buy then new, classified specials, but they have only what looks like a rebound damper adjustment on the top of the RHS leg. The damper does not seem to be doing anything and being as quick as Dr Watsons mate have guessed that the two things are not unrelated!
I have looked on the Pace website but the manuals on their do not give any obvious clues to disassembly. Although it does give a list of the oil type and amounts IF i knew which model they are. ( I can put up some photos if that will help)
Can anyone link to a strip down/rebuild procedure or offer a little advise. Fork English is a step too far as I am in Aus.