Pace RC200 frame and RC36 forks

mr bendy

Retro Newbie
I have a pace RC200 F6 with a set of RC36's on that is set up as a single speed so has rear facing dropouts on. Ive had the frame for years, the forks were bought off here a few years back.

Alas the frame has cracked at the bottom of the seat tube at the join with the bottom bracket and to be honest I cant be fussed with getting it repaired or the tube replaced.

So has anyone any advice what the frame and forks are worth together, the RC36's are in good nick, have all their travel and were serviced a couple of hundred miles back, the frame obviously needs repair - either a quick weld up or to be honest id get the seat tube replaced and the frame aligned properly.
I'm not bothered about flogging the whole set up unless someone was desperate for the lot. As for retro bits, the wheels are the only 'old' parts - the front wheel is a very old radial mavic ride which may be of interest to someone - I bought in the mid 90's in totnes and it has somehow survived this long intact, the rear is a later mavic ride which is pretty knackered, the rest of the kit is modern.

You can see the frame, forks and crack below......

Thanks guys

11hb33c.jpg


34iscpy.jpg


5kr7gh.jpg


2jcsv4j.jpg
 
My goodness that's a decent crack, but possibly worth repair, the frame and forks together may get 100 to 150 GBP, for someone who'd want to take on the repair job
 
Re:

Cheers for that, was roughly what I had in mind. The repair should be relatively easy, I just have too many bikes so will put it on the for sale forum....... Thanks :)
 
Back
Top