Birdman
Retro Guru
Pace RC 36 EVO Eddie Irvine Special Edition
1998 RC36 EVO 'Irvine' Pro - based on RC36 EVO Pro Class fork
* red anodised hollow crown, red stanchion tops, red dropouts and red canti-stud clamps.
* Titanium Nitride (TiNi) coated stanchions.
* Twin carbon braces.
* grease ports on both legs for flushing seals.
* Eibach Coil springs
Owned since new, always regreased using pace grease and grease gun , last serviced last a few years ago by Fork English but prob done less than 50 miles since then. Original fork graphics.
Condition - As with all these forks the red is now pinkish due to age. No scratches on the carbon legs but the crown has wear on one side from being rubbed by V brake cable. Ti nitride is wearing off forks around the sagged position but no scratches on the stanchions. Couple of v small chips on the alloy and fork brace, but you have to be looking to notice them. Graphics are as per pix, slightly tatty, you can get new from Fork English.
Damping is fine and as coil not air, never had reliability problems.
Choice of steerers
170mm threaded 1" OR
200mm non threaded 1 1/8"
More pix here
Looking for £160 posted recorded to UK, please PM if interested.
Matt.
1998 RC36 EVO 'Irvine' Pro - based on RC36 EVO Pro Class fork
* red anodised hollow crown, red stanchion tops, red dropouts and red canti-stud clamps.
* Titanium Nitride (TiNi) coated stanchions.
* Twin carbon braces.
* grease ports on both legs for flushing seals.
* Eibach Coil springs
Owned since new, always regreased using pace grease and grease gun , last serviced last a few years ago by Fork English but prob done less than 50 miles since then. Original fork graphics.
Condition - As with all these forks the red is now pinkish due to age. No scratches on the carbon legs but the crown has wear on one side from being rubbed by V brake cable. Ti nitride is wearing off forks around the sagged position but no scratches on the stanchions. Couple of v small chips on the alloy and fork brace, but you have to be looking to notice them. Graphics are as per pix, slightly tatty, you can get new from Fork English.
Damping is fine and as coil not air, never had reliability problems.
Choice of steerers
170mm threaded 1" OR
200mm non threaded 1 1/8"
More pix here
Looking for £160 posted recorded to UK, please PM if interested.
Matt.
