Pace Evo RC36 Restoration Replacement Parts

steve_d

Devout Dirtbag
Hi, currently restoring a set of Pace RC36 and the small initial springs, as shown in the attached image, have broken and need replacing, I've looked extensively on the internet but haven't found anything, does anyone have any spare or know where I might be able to get some, they're 20mm diameter and appear to have been 18-20mm long. On a side note, I thought there might also be bottom out elastomers on the fork as the attached image though that doesn't seem to be the case for the RC36s I have, any insight regarding this would be appreciated, thanks.

Steve
 

Attachments

  • 1723020205843.png
    1723020205843.png
    1.3 MB · Views: 14
Hi Tim @justbackdated trying to obtain a carbon bridge for RC36 forks if it is even available! Changed from Ally to carbon and it’s either getting a nice hanger to match or changing to v brakes with the tanpan type adapter which doesn’t look great if I am honest. Kona lava dome retro gravel conversion! ☺️☺️. Any help you can give. 👍

Attachments​

  • IMG_9424.jpeg
 
Hi Tim @justbackdated trying to obtain a carbon bridge for RC36 forks if it is even available! Changed from Ally to carbon and it’s either getting a nice hanger to match or changing to v brakes with the tanpan type adapter which doesn’t look great if I am honest. Kona lava dome retro gravel conversion! ☺️☺️. Any help you can give. 👍

Attachments​

  • IMG_9424.jpeg
Sorry should have said. Need the brace to have the stop / hanger for cantilever brakes. I know they did an alloy one.
 
I don't think they ever did a carbon canti bridge, and the aluminium ones are pretty rare. That said you could possibly make a new front one out of sheet carbon to replicate the aluminium design and bolt a guide to it with some ingenuity.
 
Back
Top