For Sale Orange rigid forks

[whayne]

Orange P7 rigid forks
1st fork

Nickel plated with minimal rust
125mm
1'
380mm ATC length. £35 plus post

2nd fork
Has surface rust on various areas of the fork and front reflector hole has a bolt broken off. Can be drilled out easily.

1996 model

130mm in length
1' diameter
A to C length 390mm £30 plus post

Also have the frame for one of these forks I can sell too. It is under another listing

 

[mk one]

Someone had a wanted ad up for a pair not so long ago from memory.

 

[retro_grant]

Orange P7 rigid forks
1st fork

Nickel plated with minimal rust
125mm
1'
380mm ATC length. £35 plus post

2nd fork
Has surface rust on various areas of the fork and front reflector hole has a bolt broken off. Can be drilled out easily.

1996 model

130mm in length
1' diameter
A to C length 390mm £30 plus post

Also have the frame for one of these forks I can sell too. It is under another listing

Hi whayne - do you have the forks available for sale still? I've a 90's p7 I want to get rigid forks for, I'm not exactly sure what fork size I'm after (trying to get info from orange via frame number), but hoping one of the forks above may match.

 

[whayne]

I have one left. Which are the 130mm in length

Regards whayne

 

[whayne]

I have one left. Which are the 130mm in length

Regards whayne

Hi.

Measure your head tube and I might be able to help also

 

[retro_grant]

Hi, I’ve attached photo to ensure I’ve measured correctly (apologies as not really been hands on with bike other than puncture and chain before). If correct, measure seems to be 120mm, so presume fork no good?

 

[whayne]

I will check when I get home..

 

[whayne]

Hi, I’ve attached photo to ensure I’ve measured correctly (apologies as not really been hands on with bike other than puncture and chain before). If correct, measure seems to be 120mm, so presume fork no good?View attachment 854201View attachment 854202

The head tube that the fork came off is 100mm
So will be too small. Unless you want a smaller frame as well

 

[retro_grant]

Ah well, thanks for checking anyway, appreciated

 

[KermitGKona88]

Ah well, thanks for checking anyway, appreciated

For a rough guide it is normally headtube length + 35mm