Wanted Orange Prestige 17", Controltech stem

[Bcxbcx]

I'm after a 93ish Orange Prestige frame (will consider full bikes) in 17", preferably black, but I don't mind any colour too much or needing a refurb.

Also a black Controltech stem, 1" as close to 100mm or shorter if possible (is it possible? I had 120mm back in the day and that was considered short!) And low or zero rise. I'd consider a 1 1/8" and shim it, as it wasn't uncommon to do that.

 

[Bcxbcx]

I now have a seatpost on it's way, so don't need that.

 

[Bcxbcx]

I have a Pace RC35 MXCD with a 1" steel steerer 170mm long from where the bearing race fits.
It has a 1.25" 1 1/4" 38.1mm shim, I'm looking to swap it for a 1.125" aka 1 1/8 steerer with the appropriate shim to fit the 1.25" hole in the crown.

Still looking for a Prestige and controltech stem, but I accidentally bought something with a 1 1/8" steerer requirement that I'm going to build in the meantime. .

 

[BoyBurning]

Is your steerer threaded, and are you looking for threaded or ahead...?

 

[Bcxbcx]

Mine is a Aheadset and I'm looking for an aheadset.

 

[Bcxbcx]

Sorted the steerer issue I don't need one anymore.

 

[Blackers]

I'm after a 93ish Orange Prestige frame (will consider full bikes) in 17", preferably black, but I don't mind any colour too much or needing a refurb.

Also a black Controltech stem, 1" as close to 100mm or shorter if possible (is it possible? I had 120mm back in the day and that was considered short!) And low or zero rise. I'd consider a 1 1/8" and shim it, as it wasn't uncommon to do that.

Black prestige was shared in retro orange group .
Looked a small frame to .

 

[Bcxbcx]

Black prestige was shared in retro orange group .
Looked a small frame to .

Thanks, I'll have a look.

 

[hurin76]

i have a complete orange prestige bicycle 17 inch frame factory spec xt/lx groupset - pm if interested

 

[kermisking]

HI hurin76 , I am interested in your Orange Prestige. Can I look at some pictures please ?