One inch steerer suss forks?

[Dr-Zocchi]

What dimension do you need (distance axle - bottom headset)??
May be the Marzocchi forks from the 90's (before the Bombers) are in your view?
They came in various colours, I have a lot of them ;-)

 

[Wold Ranger]

What dimension do you need (distance axle - bottom headset)??
May be the Marzocchi forks from the 90's (before the Bombers) are in your view?
They came in various colours, I have a lot of them ;-)

Firsty must have a cantilever brake brace, axle to crown no more than 410mm and if threaded 144-148mm, but for ahead about 180mm one inch diameter steerer.

 

[Dr-Zocchi]

You mean axle - crown around about 410mm?
Please compare dimensions as this are the dimensions for the forks from the 90's:
http://dr-marzocchi.projectweb.de/manua ... s.pdf/view

Steerer should be not that problem at all ;-)

 

[How-J]

Got some Quadra 10s in pretty good nick with box.
The forks have never been opened up but not had a lot of use. I'll have a look inside at the weekend when I'm home again.
Cheers
Howie

 

[kipty]

Re:

I have some 1" steerer Marzocchi mx comp
272mm steerer length
v brake and disk mounts

This is them, http://www.bikeradar.com/gear/category/ ... 007-10208/

Really good condition

I have a couple of 1" headsets and spacers etc if you need anything like that also.

 

[Wold Ranger]

Re:

Needs to have a canti hanger-brace and axle to crown needs to be on the short side, as the frame is not suspension corrected for newer forks.

 

[Wold Ranger]

Got some Quadra 10s in pretty good nick with box.
The forks have never been opened up but not had a lot of use. I'll have a look inside at the weekend when I'm home again.
Cheers
Howie

Canti brace or V?

 

[Wold Ranger]

You mean axle - crown around about 410mm?
Please compare dimensions as this are the dimensions for the forks from the 90's:
http://dr-marzocchi.projectweb.de/manua ... s.pdf/view

Steerer should be not that problem at all ;-)

Yes 410mm sorry and have a Canti-brake brace, for Cantilever brakes.

 

[Dr-Zocchi]

So alle the Marzocchi forks from the 90's, including Bombers and before (e.g. XC600/700, XCR, DH3, XC500, XC400 ...) will do it.

You mean axle - crown around about 410mm?
Please compare dimensions as this are the dimensions for the forks from the 90's:
http://dr-marzocchi.projectweb.de/manua ... s.pdf/view

Steerer should be not that problem at all ;-)

Yes 410mm sorry and have a Canti-brake brace, for Cantilever brakes.

 

[Wold Ranger]

Re:

Yes prefer mid 90's, but not long travel.