Olmo Frame and Fork (for restoration) SOLD!

[Bastos87]

Hi,

I have an old Olmo frame i'm not gonna use,

Just want to know if anyone is interested, don't know what I should ask for it, so lets say £50 + p&p , but you can make offers! (Every offer will be considered )

It has a Gipiemme BB (with bolts) and Hatta Swan Headset in good condition, rear wheel adjusters and seatbolt are also there..

Campagnolo dropouts

Front Spacing is 100mm
Rear Spacing is 125/126mm

Frame & Fork definitely needs respray/restoration.. Chromed Fork shows light pitting in some areas

Frame says 54 underneath BB
Seattube is 55cm (c-t)
Toptube is 54cm (c-c)

Seatpost 27mm

Postage to UK, France, Germany, Netherlands and Luxembourg will be £15 (economy shipping)

More and bigger pics on request

 

[foz]

very nice! if it was 5cm taller I'd have it!

 

[sswinton]

It's got me thinking...
Will it take AK brakes and what size seatpin?

 

[Bastos87]

It's got me thinking...
Will it take AK brakes and what size seatpin?

Im not sure what AK brakes are..

It used to have a Campag Nuovo Record 27mm seatpin, but It is possible 27,2mm will fit too

 

[sswinton]

Oops, Allen Key fitting as opposed to a nut holding the brake caliper on. Do you know what tubing the frame is?

 

[American Friend]

Re: Olmo Frame and Fork (for restoration)

Hi,

... don't know what I should ask for it, so lets say £50 + p&p to start, but you can make offers! (Every offer will be considered ) ...

Ig]

didn't realise this was an auction site :?

 

[Bastos87]

Oops, Allen Key fitting as opposed to a nut holding the brake caliper on. Do you know what tubing the frame is?

Ow, yes of course, it has Allen Key fitting, didnt know that abbreviation.

There's no sticker anymore on the frame.
Frame weight is 3,024kg INCLUDING Fork, BB, Headset, Seatpin and Rearwheel adjusters..

Fork weighs 706grams (with crown race)
Headset (probably) approx 120grams
Bottom Brackets with bolts (probably) approx 300grams
Seatpin and Wheel adjusters (probably) approx 25grams

=> so Frame weight will be around 1,900kg

Could it be Columbus SLX?

 

[krankers]

pm'd

 

[freddie grubb]

nice very interested ! hope you got the athena cranks ok .......

 

[sswinton]

It looks to be late 70s and so would pre-date SLX. If it takes a 27.2 seatpin I'm keen.