Nukeproof project

[dyna-ti]

First build in quite a while.
It will be a custom project build, with the proposed componentry as follows, all components are new and unused.

Frame -XL Nukeproof Mega 275 Carbon 165mm
Fork - 27.5" 170mm fox 36 factory Grip 2
Shock - Rockshox Super Deluxe Ultimate RCT
Wheels - Hope pro5 27.5" fortus 30 front and rear-
Tyres - R hans dampf 27.5x2.35 F magic mary 27.5"x2.6
Brakes - Hope tech4 V4 f&r (Orange bore caps/master cylinder lids)
Rotors - Hope 203mm V2 Vented(Blue)
Stem - Hope 50mm(1 1/8")
Spacer4s - Hope 30mm (Orange)
Bars - USE Carbon 720mm
Dropper seatpost - Fox transfer performance elite 150mm 31.6mm
Dropper control lever - Hope control lever(Orange)
Clamp - Hope 36.4mm(Orange)
Saddle - Fizik Monte S-Alloy Rail
Drivetrain - Sram GX Eagle 1x12
Sram - GX 170mm cranks 32t
Sram - DUB BSA 73mm threaded bottom bracket
Sram - GX 12 speed shifter
Sram - GX 12 speed rear derailleur
Sram - NX 12 speed cassette (shimano / HG freehub)
Sram - Eagle 12 speed chain and quicklink
Pedals - Nukeproof Horizon Pro

All cables internally routed.
Orange and blue highlights to match the frame colour and orange decals


So thats my wee project for the next couple of months

 

[coomber]

Those frames were ridiculously cheap!

 

[dyna-ti]

Those frames were ridiculously cheap!

Too good to resist.

 

[Bcxbcx]

I picked one up too, but I've yet to start building it. Frankly at £499 it would have been a mistake not to buy one.

It's going to be a home to some of the ridiculous amount of spares I have, and will probably be my park bike or get left in the alps next summer at a friends house as my alps bike.

 

[dyna-ti]

Little update.
Going pretty well. Finalized the bits, with the exception of mullet or no.

Pedals, saddle, dropper lever still to be decided on and sought.

 

[dyna-ti]

Coming along very nicely, and hopefully i can enter it in a botm, if and when theres a full modern sus vote.

 

[dyna-ti]

Things are a bit up in the air with buying a bikes worth of hope tech4 v4 brakes, and swopping the front end from the 160mm 29er pictured to a 170mm 27.5" fox 36. So nothing it wholly set. I'm terrible at constantly changing my mind as a build nears completion. Hopefully I'll get this built without too many other changes.