Guinessisgoodforyou
rBotM Winner
You may need a gear cable tunnel for the front mech. 600 is a great group set in any version.
Seeing as the bike is quite road worthy, I might not get into the changes until the spring. So the new plan is just a clean then back on the road for a few gentle rides. I will try to get some pics if that is the case.
You won't need guides, just outer cable. You will need a front mech with an outer cable stop though. Yes you can remove the secondary lever, it will leave a stub sticking out. Check for a small spring in the hole, often lost. You will need to adjust your brake cables after.Thanks for your reply and the info. Yes, the down tube has stops on both sides. I’ll get some pics up tomorrow evening, here’s one of the drive side from the listing pics for now. The left side stop is in the same position.
Thanks again
It is.That’s good to know, thanks. This was an additional image the seller of my derailleur set sent me, the quality isn’t great but It looks like a cable stop in the area I’ve ringed in red. Please tell me that’s a cable stop