Mystery Sports Frame 30's 40's HELP!
- Thread starter SullyW5
- Start date
The frame number of 4597 does fit very well though.
Quite a good thread here:
http://www.cyclechat.net/threads/f-w-ev ... 143/page-5
1937/8 with frame number 4491
http://www.classiclightweights.co.uk/bi ... nd-rb.html
Quite a good thread here:
http://www.cyclechat.net/threads/f-w-ev ... 143/page-5
1937/8 with frame number 4491
http://www.classiclightweights.co.uk/bi ... nd-rb.html
Jonny69
Senior Retro Guru
It could just as well be a BSA or a Triumph. Scores of bikes of that era used those lugs. I think there are a couple of things that will help you identify it.
-It's wearing 1930s fittings (like the mudguard fittings) and it has a head clip. Head clips were all but obsolete by the 40s. I think this is a good enough indicator that it is a late 30s frame. The angles are not that slack, so I think it's not early 30s. I see what looks like chrome on the fork tips and stays. This tells us that it's probably not a wartime frame because chrome was scarce then and less common on bike frames. You tend to see it pre-war and then some time after, but not during war years.
-You say it's Reynolds 531 - how have you identified that? If it is, then it will narrow down the builders. for that era, the seatpost should be 26.8mm for Reynolds 531. 27mm and 27.2mm was later Reynolds 531.
-If it is 531, it doesn't have modified 'fancy' lugs. A lot of hand built bikes (lightweights) had modified lugs, while probably all factory built bikes had standard lugs.
-The tops of the stays were another place where the makers were able to distinguish their bikes from the competition. If you can spot which builder did that to their their seat stays then it might help.
I think it's a factory built bike. Almost certainly a BSA, Sunbeam, Triumph, Sun etc if it is. It could well be that Sunbeam since it's got the Cyclo gear hanger.
-It's wearing 1930s fittings (like the mudguard fittings) and it has a head clip. Head clips were all but obsolete by the 40s. I think this is a good enough indicator that it is a late 30s frame. The angles are not that slack, so I think it's not early 30s. I see what looks like chrome on the fork tips and stays. This tells us that it's probably not a wartime frame because chrome was scarce then and less common on bike frames. You tend to see it pre-war and then some time after, but not during war years.
-You say it's Reynolds 531 - how have you identified that? If it is, then it will narrow down the builders. for that era, the seatpost should be 26.8mm for Reynolds 531. 27mm and 27.2mm was later Reynolds 531.
-If it is 531, it doesn't have modified 'fancy' lugs. A lot of hand built bikes (lightweights) had modified lugs, while probably all factory built bikes had standard lugs.
-The tops of the stays were another place where the makers were able to distinguish their bikes from the competition. If you can spot which builder did that to their their seat stays then it might help.
I think it's a factory built bike. Almost certainly a BSA, Sunbeam, Triumph, Sun etc if it is. It could well be that Sunbeam since it's got the Cyclo gear hanger.
Thanks Jonny. Great insights and brought me back to basics.
531? How foolish would I sound if I said it was from the sound of the tubes when pinged? Let's move on then.
Yep, measured and it looks like 26.8
Agreed on factory build I think. It's all pretty generic. Lugs have been filed down but that would have been pretty standard I imagine.
The Sunbeam was my initial pick but....
It's the frame number that's really slowing me down. On top of the seat lug??
531? How foolish would I sound if I said it was from the sound of the tubes when pinged? Let's move on then.
Yep, measured and it looks like 26.8
Agreed on factory build I think. It's all pretty generic. Lugs have been filed down but that would have been pretty standard I imagine.
The Sunbeam was my initial pick but....
It's the frame number that's really slowing me down. On top of the seat lug??
Hillwalker
Retro Guru
- Feedback
- View
SullyW5":otwqb0xn said:
Happy to provide any (limited) help here. Hilary Stone has a 30s Evans tourer at the moment.
http://www.hilarystone.com/images/sale% ... s-4785.jpg
Now you've found possible oil ports on the head tube, might you have the maker?
HW
Thanks HW...saw that lovely frame.
The oil ports do seem to match and the top of the seat stays matches however, as you pointed out, no sign of the Evans dropouts. The head lug finishing differs as well....mine hasn't been modified. Incidentally I haven't come across one with Russ type forks either.
The 4597 code fits perfectly with Evans though placing it around 1939. Perhaps the 9 prefix just reflects that?
(By limited help I'll take it that you are happy to let me move in until this is solved. Very grateful. I'll be there around tea time)
The oil ports do seem to match and the top of the seat stays matches however, as you pointed out, no sign of the Evans dropouts. The head lug finishing differs as well....mine hasn't been modified. Incidentally I haven't come across one with Russ type forks either.
The 4597 code fits perfectly with Evans though placing it around 1939. Perhaps the 9 prefix just reflects that?
(By limited help I'll take it that you are happy to let me move in until this is solved. Very grateful. I'll be there around tea time)
Similar threads
Latest posts
-
-
-
-
-
rBoTM RBotM November 2024 - Open Month - Entries Now Open!!!!!
- Latest: Christoph2.8i