mystery late seventys road bike
- Thread starter biglandy130
- Start date
Looks like the product of a small builder, 100's used Nervex Pro.
The top eyes look like solid eyes, but are set too high, and almost cover the seat lug.
The cable guide is a mess, and looks like a later addition.
Wrapover seat stays were almost universal on decent frames in the early 1960's. Some cheaper frames just tacked a plate over the hollow top of the seat stays. Surprisingly the purple carlton looks like solid top eyes.
The top eyes look like solid eyes, but are set too high, and almost cover the seat lug.
The cable guide is a mess, and looks like a later addition.
Wrapover seat stays were almost universal on decent frames in the early 1960's. Some cheaper frames just tacked a plate over the hollow top of the seat stays. Surprisingly the purple carlton looks like solid top eyes.
biglandy130
Dirt Disciple
thanks the frame number is 61 453 which makes me wonder if it was a 1961 frame with a later group set
biglandy130
Dirt Disciple
thanks again just found some photos of jensens and could be. its the post 78 nuovo record group set and 700c wheels that could make it later or it could have been rebuilt i supose.i wonder if chas roberts could identify it.
biglandy130
Dirt Disciple
i have been looking at my bike and the pics of jensens i think mine probably started out as a single speed and was converted hence the cable eyes and guide brackets not being quite right
systemBuilder
Retro Newbie
Some identification information
The bottom bracket cable routing is indeed unusual, and I believe its from a repaint - NOT original. Someone has disassembled a campagnolo bottom bracket routing clip and brazed it onto your bottom bracket. Those are NOT campagnolo BB routing braze-ons, it's a kluge, unfortunately.
If the seatstay wrapover stays taper to a point and meet at the top of the seat lug, and if you have a davis crown, then this bike would match my 1967 raleigh / carlton competition (USA model, in the USA carltons were imported with raleigh livery). The Davis crown would be very light, and if you lay the fork flat on the table the crown has a |E look to it, with the 'E' in a curvey shape and the '|' a solid slash across the top of the crown.
Best wishes and good luck!
The bottom bracket cable routing is indeed unusual, and I believe its from a repaint - NOT original. Someone has disassembled a campagnolo bottom bracket routing clip and brazed it onto your bottom bracket. Those are NOT campagnolo BB routing braze-ons, it's a kluge, unfortunately.
If the seatstay wrapover stays taper to a point and meet at the top of the seat lug, and if you have a davis crown, then this bike would match my 1967 raleigh / carlton competition (USA model, in the USA carltons were imported with raleigh livery). The Davis crown would be very light, and if you lay the fork flat on the table the crown has a |E look to it, with the 'E' in a curvey shape and the '|' a solid slash across the top of the crown.
Best wishes and good luck!
Similar threads
