mynchiboy's clearout part deux updated and free choc!

mynchiboy

Gold Trader
Feedback
View
Due to the success of the clearout phase one I thought I would try my luck with the following... Prices include UK postage yet again :)

SR power ring set (110bcs and 24/36/48 ) £8 SOLD (LongboardSi)

Original crud catcher / guard set £8 SOLD (killerV)

Rolls 'due' saddle with alloy forged tension rail thing, leather in good shape with only slight split above badge on right corner. Very comfy to boot £16

Sachs wavy shifters with original grips, 7 speed and work well with shimano good condition again £10

Amoeba (red) alloy bars, about 585mm with slight angle, paint marked up as usual but not crushed etc. £7

Control Tech 1 inch shafted stem, about 140mm total length, zero rise. Stickers removed but in great shape £13 SOLD (IbocproSX)

L&M stardrive cranks, 175mm arms, 110bcd spider and in very good shape indeed BUT need spider bolts and a little bit of tapping in one bolt hole due to snapped bolt :evil: Have already drilled out most of it so should be easy to sort.. £25?

Campag record OR 50 tooth chainring again 110 bcd, bit marked but loads of life left £5

And finally '92 specialized stumpy frame, now with better pic! 18 inch with orig dark purple paint :cool: 1 inch steerer as usual, just under 21 inch top tube. Missing decals, would make great singlespeed stealth bike ;) Comes with XT bottom bracket £55

Paypal preferred but will take any means of getting fundage. Pics below...[[/b]
 

Attachments

  • chainrings 2.jpg
    chainrings 2.jpg
    34.1 KB · Views: 1,674
  • crud catcher.jpg
    crud catcher.jpg
    25.7 KB · Views: 1,674
  • saddle 1.jpg
    saddle 1.jpg
    12.8 KB · Views: 1,674
  • saddle 2.jpg
    saddle 2.jpg
    15.4 KB · Views: 1,674
More pictures :)
 

Attachments

  • stem.jpg
    stem.jpg
    25.9 KB · Views: 1,670
  • shifters.jpg
    shifters.jpg
    15.1 KB · Views: 1,670
  • stardrive 2.jpg
    stardrive 2.jpg
    31 KB · Views: 1,670
  • stumpy 004.jpg
    stumpy 004.jpg
    29.2 KB · Views: 1,277
is that £8 per chainring, or £8 for the set? If it's the set then I'll take them (assuming they're not too worn and will work fine on a new cassette).

Si F
 
Re: mynchiboy's clearout part deux

mynchiboy":3j2w73lc said:
Amoeba (red) alloy bars, about 585mm with slight angle, paint marked up as usual but not crushed etc. £7

Pic please ;)
 
crudcatcher

aaah figured out how to reply, simple really. I'll take the crud catcher if still available please,

Gareth
 
1" Control tech quill stem if it ships to Holland please .

You have PM re shipping. Thanks

PS My first MTB was a dark purple Stumpy, this ones too small though. :roll:
 
Re: mynchiboy's clearout part deux

Pickle":2vv4tk6f said:
mynchiboy":2vv4tk6f said:
Amoeba (red) alloy bars, about 585mm with slight angle, paint marked up as usual but not crushed etc. £7

Pic please ;)

Pics below matey :)
 

Attachments

  • bars 1.jpg
    bars 1.jpg
    9.5 KB · Views: 1,416
  • bars 2.jpg
    bars 2.jpg
    10.7 KB · Views: 1,416
LongboardSi":mdky7f5q said:
is that £8 per chainring, or £8 for the set? If it's the set then I'll take them (assuming they're not too worn and will work fine on a new cassette).

Si F

It's £8 for the set, and they're in pretty good shape, can't see why they would kill a new cassette :) Have sent PM
 
Back
Top