Moved to...
viewtopic.php?f=2&t=340652
Items below are sold:
X-Lite titanium (XLR Pro 540) handlebar - Good - decals feint, but present - £40 (£35 with frame) - Sold
Vit T2 Frame - 17" - new decals - Excellent condition: no dings, dents or cracks etc. £450 plus P+P - Sold for £350
Continental Pre-Molar Tyres - VGC - £40 (£35 with frame) - sold
Control Tech Titanium QRs - pretty much as new (fitted/removed from Axis TT build) - cost me £70 - £60 - Now £55 posted - Sold
Chris King 1" No-threadset - VGC - silver - £60 - frame not included! - sold - £53 posted
X-Lite titanium seatpost clamp Bolt - Excellent - £15 - sold
XTR M900 Cassette - Excellent, hardly any use - £65 - sold
SRP Bolts - New - green! - chainring set and rear mech hanger - £20 - sold
IRC (Yeti) FRO Tyres - VGC - £90 - sold
Ritchey Aheadset 1" - fitted/removed, no use, just marks from fitting etc. - £20 posted (star-nut not included) - sold
Pace RC35 - Excellent - just refurbed (new elastomers, seals, cir-clips and RC7 Grease) With ti bolt kit and rare front canti-cable hanger (rear mount brace also included) Shown with titanium steerer (not available) £180 with (1" x 200mm) steel steerer. The crown will take 1 1/4" and 1 1/8" (with shim) steerers as well. - Sold
Ritchey WCS Z-Max 2.1 Tyres - Good used condition, fine to ride, logos faded - £80 - sold for £75
XTR M900/Bontrager Wheelset - OE on KHS Montana Team - £120 - Sold
USE seat-post Shim for USE (26.8mm - 25mm 'post) - £8 - gone
Syncros Hang-doggy 1" - VGC - £30 - sold
XT M735 - VGC - 28.6mm bottom pull - £20 - sold
Finish Line Ti prep - for installation of ti and alloy bolts etc - New - FOC with above studs - gone with one pair of SID ti studs
TA Specialities titanium BB (suit above cranks) - new bearings - 68/73mm x 114mm - £40 - sold
XTR M900 - VGC - 28.6 top pull - £30 - sold
Easton CT2 Carbon Flat bar - Uncut - VGC - £30 - sold
Pace RC35 spare parts - Some new bits; seals, spacers, elastomers and some used (but good) other parts; Pace Speed-spring, elastomers, spacers, cir-clips - £40 - sold for £50 on ebay!
Pace RC30 fork - VGC - I paid £170 for this, will sell for £150 - 1 1/8" x 200mm, 1" x 210mm with shim + £30 - Sold for £160 on ebay
SID titanium brake studs - for 28mm SID - £15 - sold for £12 on ebay
Kalloy Alloy - 100mm x 1 1/4" with rise - £20 - sold on ebay
Easton CT2 Carbon Riser bar - Uncut - VGC - £30 - Sold for £35 on ebay
Titanium and alloy Frame Clamp Bolt - New - £15 - sold
Control Tech - 1 1/8" x 100mm with rise - £25 - sold
IRC Mythos - 1.95 - Amberwall - Folding - VGC - £60 - sold
Acor Pizza Cutter - cable guide - as new - £20 - sold for £15 posted
Tune - light + cool - 175mm, some anno worn off (the light makes them look worse!) - £100 - sold for £80 plus P+P
XTR M900 Jockey Wheel - BNIP - £20 - sold
Pauls brake parts - there are two (only one in pic) - £10 - sold
[/u][/b]XT Thumbies - VGC - £40 -sold
MRC D-Cell canti Brakes - Super light & Cool - Black - VGC - £110 with black Chill-pills - sold
XTR M900 Front-mech - 28.6mm Down-pull - VGC - £30
XTR M900 Rear Mech - VGC - £80 - both sold for £100 plus post
XTR M900 UN90 BB - 68 x 107mm - One slight notch and some tarnishing, but perfectly usable - £20 - sold
Chris King Sotto Voce 1 1/8" No-threadset - Black - VGC - £60 - sold
Zero Titanium QR's - Pewter - Good - £30 - sold for £25
Pace RC130 Handlebar - Pewter - GC - very slight bar-end crimp - 23 1/8" (587mm) long - £30 - sold
Ringle Front QR (steel) - Good - £20 - sold
Action-tec Titanium BB - 68 x 107mm - VGC - £60 - sold
XTR M900 Cassette - VGC - Very Little Use - £70 - Now £60/b] - sold
X-Lite Alto-Pro Bar-ends - Silver - As new - £35 - Now £30 -sold
XTR M900 canti-set (with pads) - VGC - £80 - Now £70 - sold
Onza Titanium Bar-ends - Excellent - £80 - Now £70 - sold
Shimano M737 SPD - Slight play, but otherwise good - £20 - Now £15 - sold
Tune Bar ends - light and cool - £20 - Now £15 - sold
1" RC35/30 Steerer with shim to fit 1 1/8" crown x 200mm - £40 - Now £30 - sold
RC35 Steerer with crown-race shim - 1 1/4" x 180mm (overall length) - £30 - Now £25 - sold
Onza chill-pills - 'nib' blue/turquoise - £20 - Now £15 - sold
Dia-Compe SS5 Brake Levers - £10 - Now £8- sold
1 1/4" to 1 1/8" Shim - made by Rampage, cost me £20 - £15 - Now £10
- traded
Ringle Titanium QRs - £80 - Now £70 - sold
Dia-compe SS5 Levers - £15 - sold
Marzocchi 1" x 175mm Steerer - VGC - £30 - Now £25 - sold
Hope titanium purple Hub-set - 32H - Excellent - I paid £200 for these, which was probably too much!...£180 plus post - Now £160 - sold for £150 plus post
viewtopic.php?f=2&t=340652
Items below are sold:
X-Lite titanium (XLR Pro 540) handlebar - Good - decals feint, but present - £40 (£35 with frame) - Sold
Vit T2 Frame - 17" - new decals - Excellent condition: no dings, dents or cracks etc. £450 plus P+P - Sold for £350
Continental Pre-Molar Tyres - VGC - £40 (£35 with frame) - sold
Control Tech Titanium QRs - pretty much as new (fitted/removed from Axis TT build) - cost me £70 - £60 - Now £55 posted - Sold
Chris King 1" No-threadset - VGC - silver - £60 - frame not included! - sold - £53 posted
X-Lite titanium seatpost clamp Bolt - Excellent - £15 - sold
XTR M900 Cassette - Excellent, hardly any use - £65 - sold
SRP Bolts - New - green! - chainring set and rear mech hanger - £20 - sold
IRC (Yeti) FRO Tyres - VGC - £90 - sold
Ritchey Aheadset 1" - fitted/removed, no use, just marks from fitting etc. - £20 posted (star-nut not included) - sold
Pace RC35 - Excellent - just refurbed (new elastomers, seals, cir-clips and RC7 Grease) With ti bolt kit and rare front canti-cable hanger (rear mount brace also included) Shown with titanium steerer (not available) £180 with (1" x 200mm) steel steerer. The crown will take 1 1/4" and 1 1/8" (with shim) steerers as well. - Sold
Ritchey WCS Z-Max 2.1 Tyres - Good used condition, fine to ride, logos faded - £80 - sold for £75
XTR M900/Bontrager Wheelset - OE on KHS Montana Team - £120 - Sold
USE seat-post Shim for USE (26.8mm - 25mm 'post) - £8 - gone
Syncros Hang-doggy 1" - VGC - £30 - sold
XT M735 - VGC - 28.6mm bottom pull - £20 - sold
Finish Line Ti prep - for installation of ti and alloy bolts etc - New - FOC with above studs - gone with one pair of SID ti studs
TA Specialities titanium BB (suit above cranks) - new bearings - 68/73mm x 114mm - £40 - sold
XTR M900 - VGC - 28.6 top pull - £30 - sold
Easton CT2 Carbon Flat bar - Uncut - VGC - £30 - sold
Pace RC35 spare parts - Some new bits; seals, spacers, elastomers and some used (but good) other parts; Pace Speed-spring, elastomers, spacers, cir-clips - £40 - sold for £50 on ebay!
Pace RC30 fork - VGC - I paid £170 for this, will sell for £150 - 1 1/8" x 200mm, 1" x 210mm with shim + £30 - Sold for £160 on ebay
SID titanium brake studs - for 28mm SID - £15 - sold for £12 on ebay
Kalloy Alloy - 100mm x 1 1/4" with rise - £20 - sold on ebay
Easton CT2 Carbon Riser bar - Uncut - VGC - £30 - Sold for £35 on ebay
Titanium and alloy Frame Clamp Bolt - New - £15 - sold
Control Tech - 1 1/8" x 100mm with rise - £25 - sold
IRC Mythos - 1.95 - Amberwall - Folding - VGC - £60 - sold
Acor Pizza Cutter - cable guide - as new - £20 - sold for £15 posted
Tune - light + cool - 175mm, some anno worn off (the light makes them look worse!) - £100 - sold for £80 plus P+P
XTR M900 Jockey Wheel - BNIP - £20 - sold
Pauls brake parts - there are two (only one in pic) - £10 - sold
[/u][/b]XT Thumbies - VGC - £40 -sold
MRC D-Cell canti Brakes - Super light & Cool - Black - VGC - £110 with black Chill-pills - sold
XTR M900 Front-mech - 28.6mm Down-pull - VGC - £30
XTR M900 Rear Mech - VGC - £80 - both sold for £100 plus post
XTR M900 UN90 BB - 68 x 107mm - One slight notch and some tarnishing, but perfectly usable - £20 - sold
Chris King Sotto Voce 1 1/8" No-threadset - Black - VGC - £60 - sold
Zero Titanium QR's - Pewter - Good - £30 - sold for £25
Pace RC130 Handlebar - Pewter - GC - very slight bar-end crimp - 23 1/8" (587mm) long - £30 - sold
Ringle Front QR (steel) - Good - £20 - sold
Action-tec Titanium BB - 68 x 107mm - VGC - £60 - sold
XTR M900 Cassette - VGC - Very Little Use - £70 - Now £60/b] - sold
X-Lite Alto-Pro Bar-ends - Silver - As new - £35 - Now £30 -sold
XTR M900 canti-set (with pads) - VGC - £80 - Now £70 - sold
Onza Titanium Bar-ends - Excellent - £80 - Now £70 - sold
Shimano M737 SPD - Slight play, but otherwise good - £20 - Now £15 - sold
Tune Bar ends - light and cool - £20 - Now £15 - sold
1" RC35/30 Steerer with shim to fit 1 1/8" crown x 200mm - £40 - Now £30 - sold
RC35 Steerer with crown-race shim - 1 1/4" x 180mm (overall length) - £30 - Now £25 - sold
Onza chill-pills - 'nib' blue/turquoise - £20 - Now £15 - sold
Dia-Compe SS5 Brake Levers - £10 - Now £8- sold
1 1/4" to 1 1/8" Shim - made by Rampage, cost me £20 - £15 - Now £10
- traded
Ringle Titanium QRs - £80 - Now £70 - sold
Dia-compe SS5 Levers - £15 - sold
Marzocchi 1" x 175mm Steerer - VGC - £30 - Now £25 - sold
Hope titanium purple Hub-set - 32H - Excellent - I paid £200 for these, which was probably too much!...£180 plus post - Now £160 - sold for £150 plus post