Mountain Cycle Shockwave 9.5 revamp. 14.7kg final weight.

Picked up these new old stock crank arms for a reasonable price online from... Malaysia of all places.
The only problem now is, all my 2 or 3 existing chainrings are all 104mm and these have a 94mm spider.😕
 

Attachments

  • 1689922254-97.jpg
    1689922254-97.jpg
    264.9 KB · Views: 5
  • 1689922253-12.jpg
    1689922253-12.jpg
    222.3 KB · Views: 5
  • 1689922253-30.jpg
    1689922253-30.jpg
    294.8 KB · Views: 5
Last edited:
Well it is lighter and cheaper, yes.
The thing is though, I don't really like the look of it.
I miss the spider that wraps around the crank arms.

I might get a new 104mm spider from North Shore Billet. Expensive though.
Either than or 94mm chainring.
 
I got a nice price on a few lightweight nos headsets, KCNC & crank brothers (like 30 to 40 euros).
So I may or may not fit one of those.

May as well go for an attempt at the title of "world's lightest mountain cycle shockwave 9.5".😁
 
This has been ordered.
Reasonably expensive for what it is, but such is life.

I might just hang on to the 94mm spider in case I want to downsize the front chainring one day.

Also thought about getting a direct mount chainring instead, which would have been cheaper and no doubt lighter, but as previously stated, don't really like the look of them (or how they attach, I like the more sculpted/moulded look where they blend into the crank arms a bit). So too new for my liking.

Screenshot 2023-09-09 at 20-06-06 NSB-SS0005-B-S-x0-gxp-104-bcd-spider_1024x1024.jpg (WEBP Ima...png
 
This arrived today.
Just some cheapy SRAM/truvativ GXP cups (only £25).
Was not able to find a black version in 83mm width, only silver.
So went with a black 100mm fat version instead.

Seeing as the BB shell does not seem to have any open entry points, I will forgo the centre sleeve, bugger it.🤪
Well it won't fit anyway. Of course, that was the plan.
I'm now selling that separately here.

The new crank/BB combination looks to save around 300 grams of weight (well, mass) overall.
I thought it would be somewhat more than that actually. Oh well.🤔
 

Attachments

  • truvativ-gxp-xr-innenlager-fatbike-bsa-100-1.jpg
    truvativ-gxp-xr-innenlager-fatbike-bsa-100-1.jpg
    181.5 KB · Views: 0
  • sram-bottom-bracket-truvativ-gxp-xr-bsa-fatbike.jpg
    sram-bottom-bracket-truvativ-gxp-xr-bsa-fatbike.jpg
    25.9 KB · Views: 0
Well, it appears I ballsed up.😳

I took off the existing crankset + BB. Nothing untoward.

Then as I was inspecting/cleaning the old BB in order to photograph and sell,
I noticed that it looked shorter than I expected. Or rather, normal size.🤔
Then reading "73mm" on the shell (centre sleeve) I was like "funny, shouldn't that read 83mm?"

Dashed over to measure the shell width and it is indeed 73mm not 83mm.
I could have sworn it was 83mm.😟

Lesson learned kids, don't trust your memory to these things.
I thought I could remember all the sizes of all the bits on all my bikes. Apparently not.
Oh well.

I might be able to put some spacers on either side (or something).😐
 
Last edited:
Bummer. Been following your thread for a while.

5mm each side might be a bit much for the BB cups.

Kinda saw that one coming, but I figured you'd know the width the BB shell better than me...
 
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Back
Top