futuristicoldman
Senior Retro Guru
- Feedback
- View
Mavic 630 chainset 170mm inc 42t and 56t rings. Original aluminium allen key dust caps included. Outer ring is a rather handsome stronglight. Looks nice on the bike but plenty of scratches and scuffs when you get up close. Alas the extractor threads on the right hand crank are a bit knackered so it goes on fine and is perfectly good to use but requires some ingenuity to remove it! There are some knocks on the back where it has been helped off with a punch. If you have a little common sense you can take off the left hand crank, remove the b/b adjustable cup, loosen the right hand crank bolt a couple of turns then strike the bolt with a hammer and drift. The crank will come off without damaging or marking anything. Pics up in a wee while when my phone has charged. £29 posted. Or £19 if you add it to any other items that i'm selling.
Nice pair of simplex mechs, front is a super LJ and rear is a prestige. Both in nice used condition £45 for the pair posted via courier (mainland UK, Highlands and islands will be a wee bit more. *****NOW £39 *******SOLD THANKS***
Heres a nice pair of fairly raked forks with a 198mm 1" steerer with 13mm of thread (if I can find my cutter I may be able to take it a bit lower). Paint is ok for an old fork with the usual blemishes here and there (mainly behind the brake anchor and dropouts. axle to brake bolt centre is roughly 363mm, takes a countersunk allen key brake bolt. weighs approx 700g. the threads are flattened at the rear but will accept a headset just fine, steerer is nice and long so plenty to go at if you wanted a shorter steerer threaded down.
£29.98 Delivered by courier within the UK (Highlands and islands may bump the price up a bit) ****NOW £25****
Mavic MA40 36hole built with double butted spokes with campagnolo hubs, i'm not to sure what model they are. rear axle has 120mm spacing. Includes a 13/22t screw on block and a nice pair of campagnolo q/r's. tyres and tubes are old junk, i'll leave them on to protect the rims in the post. Wheels run true and bearings are fine, would benefit from a a good polish up.
£40 collected (west yorkshire). Can send out via courier for £46 within mainland UK (highlands and islands will be a bit more i'm afraid)
PICTURES FURTHER DOWN THE THREAD...................SOLD...............
Thanks
Nice pair of simplex mechs, front is a super LJ and rear is a prestige. Both in nice used condition £45 for the pair posted via courier (mainland UK, Highlands and islands will be a wee bit more. *****NOW £39 *******SOLD THANKS***
Heres a nice pair of fairly raked forks with a 198mm 1" steerer with 13mm of thread (if I can find my cutter I may be able to take it a bit lower). Paint is ok for an old fork with the usual blemishes here and there (mainly behind the brake anchor and dropouts. axle to brake bolt centre is roughly 363mm, takes a countersunk allen key brake bolt. weighs approx 700g. the threads are flattened at the rear but will accept a headset just fine, steerer is nice and long so plenty to go at if you wanted a shorter steerer threaded down.
£29.98 Delivered by courier within the UK (Highlands and islands may bump the price up a bit) ****NOW £25****
Mavic MA40 36hole built with double butted spokes with campagnolo hubs, i'm not to sure what model they are. rear axle has 120mm spacing. Includes a 13/22t screw on block and a nice pair of campagnolo q/r's. tyres and tubes are old junk, i'll leave them on to protect the rims in the post. Wheels run true and bearings are fine, would benefit from a a good polish up.
£40 collected (west yorkshire). Can send out via courier for £46 within mainland UK (highlands and islands will be a bit more i'm afraid)
PICTURES FURTHER DOWN THE THREAD...................SOLD...............
Thanks
