Mavic 238's and a cheapy

[IDB1]

All prices include UK mainland postage, paypal gift preferred (or pay the fees please), cheques, p.o.'s etc. all ok too..

Sensible (or the occasional cheeky) offers considered

Cheap wheels, both appear to run true, non q/r axle on the Salcano rim feels tight £10 each.

Salcano rim on XRP hub

flat profile 'Crosser' spokes..

Mavic 238's on Voodoo front hub, Parallax rear.
Rear has a slight 'blip' when it spins (but didn't rub in use).
Won't come with tyres, tubes or ss stuff. Will come with a choice of either virtually new 7-speed no-name cassette or 8-speed Shimano HG offering in good condition. £50

Swaps in my sig..

Sold:
Bash guard and granny ring wotsit £15 - SOLD!
Race Face Crank Arms.. take note of the close-up of the non-drive side arm.. don't know enough about cranks to know whether this is an issue or not.
Both pedal threads seem fine (just removed a pair of DMR V12's and the undid a-ok) £20 - SOLD!!
Alex rim on STX-RC hub £10 - SOLD!
Red DX V's, whole bikes' worth including levers and pads (no bolts) £30 - SOLD!!
Will also include an extra r/h DX lever (identical to these)
Pair 1 1/8" threadless Tange forks, 186mm steerer length.. £18 - SOLD!
Shimano M600 V-brakes.. a bikes worth, with Clarkes pads.. £10 - SOLD!
BBB riser bars, spec as pics £12.50 - SOLD!

 

[kaiser]

Race face cranks please

 

[IDB1]

Race face cranks please

pm sent

 

[D_XZ]

How long is the GT stem? Looks like it has a fair bit of rise - any idea how much?

I presume it's for normal handlebars rather than oversized?

Cheers

 

[IDB1]

RF cranks sold..

How long is the GT stem? Looks like it has a fair bit of rise - any idea how much?

I presume it's for normal handlebars rather than oversized?

Cheers

It does have quite a rise.. not sure how much but, with the stem hole flat on the table, the centre of the bar clamp is 60mm up - possibly a couple of mm more..
It's 100mm long (measured on the top edge, centre to centre) and for standard bars.

Here it is mounted on the bike
http://img.photobucket.com/albums/v615/kirstylt/16052010906.jpg

 

[FluffyChicken]

Did I miss the cranks, don't see a picture :?

 

[IDB1]

Did I miss the cranks, don't see a picture :?

Kaiser grabbed 'em mate.. uber quickly..

Added some wheels and M600 V's...

 

[paulvandermoolen]

maybe some swaps on the DX v's???

have parts to swap

greetz paul

 

[IDB1]

maybe some swaps on the DX v's???

have parts to swap

greetz paul

Nothing in your sale thread Paul...
Only really interested in what I've put at the bottom of the first post..

 

[jimmy5willy]

Price for the Mavic 238 wheels if we have nothing to swap?