Mavic 1000 SSC Groupset

[ultimobici]

Looking for this to build a TVT 92.

• Cranks - Preferably 172.5
  Bottom bracket
  Front & rear mechs
  Brake callipers
  Brake Levers (440 aero levers)
  32 hole hubs

 

[altec]

Re:

440 SSC brake levers does not belong to 1000 SSC group. You should aim at 430 SSC brake levers. Currently there is one set of 430 brake levers on ebay:

http://www.ebay.com/itm/Mavic-430-SSC-b ... Sw2xRYRc6K

cheers

 

[ultimobici]

Re: Re:

440 SSC brake levers does not belong to 1000 SSC group. You should aim at 430 SSC brake levers. Currently there is one set of 430 brake levers on ebay:

http://www.ebay.com/itm/Mavic-430-SSC-b ... Sw2xRYRc6K

cheers

I know it's not exactly as Mavic sold it originally, but there was a time when they overlapped.

 

[altec]

Re:

The one on the picture is also Modolo but with braking cable hole on blades hidden under plastic caps. Mavic 440 brakes were produced by Dia Compe (in fact it is BRS 500 Dia Compe model) and for sure it is a different Mavic era.

http://www.tearsforgears.com/2009/11/bi ... group.html

 

[ultimobici]

Re:

Nope.

430 & 440 were made by Modolo. Mavic 451 were made by Dia Compe. How do I know? I had em all at one time or another.

Thanks.

 

[audax]

Hi,

I have cranks that came on an Alan I bought new,I swapped them for Record cranks after about 100 miles so they are pretty much unused. It is cranks only no rings or dust caps(I swapped them onto the Campag cranks)
172.5. I am after £75 and can send pics. if interested.Based near Wembly or work near Kings Cross so I may be able to meet up rather than post if that helps.
I also have bottom brackets but both are well used(still pretty good condition though.)
One for normal BSC threaded bottom brackets and one that needs the shell chamfering

I have front and rear mechs.,but not sure where they are at the moment and would probably only sell them along with the matching levers.

Cheers

 

[ultimobici]

Hi,

I have cranks that came on an Alan I bought new,I swapped them for Record cranks after about 100 miles so they are pretty much unused. It is cranks only no rings or dust caps(I swapped them onto the Campag cranks)
172.5. I am after £75 and can send pics. if interested.Based near Wembly or work near Kings Cross so I may be able to meet up rather than post if that helps.
I also have bottom brackets but both are well used(still pretty good condition though.)
One for normal BSC threaded bottom brackets and one that needs the shell chamfering

I have front and rear mechs.,but not sure where they are at the moment and would probably only sell them along with the matching levers.

Cheers

Hi

Yes I'm interested. Could you let me have pics as well as an idea of cost of the mechs & levers too please?

Thanks

 

[audax]

No problem,
Will take me a couple of days.

 

[ultimobici]

Re:

Great. Thanks

 

[altec]

Re:

https://www.leboncoin.fr/velos/1073024380.htm?ca=12_s

https://www.leboncoin.fr/velos/1072316233.htm?ca=12_s