All items located Hobart, Tasmania (Australia) and prices before postage, will post anywhere at cost.
NOS DX M650 calipers, NO SPRING HARDWARE, suit replacing tatty caliper arms. 3 pads match, one does not.
$Karma
M739 STI, cantilever (may be able to shuffle spacers for V brake?), no indicator windows, missing one cable cover and one shifter barrel adjuster. Shifter units function perfectly, good for spares.
$Karma
M739 derailleur, long cage, anodising crazed on knuckles otherwise in VGC.
$10
Manitou SX-Ti fork, I think its 1997. V-brake arch no canti stop. In good overall condition, firm elastomer stack in good condition, no leaks, stanchions unmarked, only light marks on sliders, damper works as does adjustment, have a heap of NOS damper bits to go with as spares, 200mm aluminium steerer
$100
NOS Right hand (Rear) DX rapidfire 'piano' shifter. NOS except I stole the bolt that mounts the shift pod to the brake lever for my M900. Perfect to replace a sticky shift unit.
$10
Near new 3DV controltech bars, very light marks from fitting/removing controls which are wholly covered by grips, present as NOS with grips and controls fitted, uncut, uncrimped, undamaged.
$40
NOS Kore 120x5 stem, polished, 1-1/4" Threadless, stem drawer damage to decals one letter missing. No packaging.
$30
NOS polished syncros stem, 1" threadless, 150x0. Ignore the handlebar.
$30
Near NOS gray Syncros threadless 1-1/8" stem, 110x15, in original packaging but couple of letters on stem damaged and some signs of fitting.
$30
Black 1-1/8" Syncros Hinged face stem, 130x0 (I think..will confirm)
$20
Silver Taperlite bar, forward facing logos in rough condition, some fading toward ends of bar. Otherwise uncut, uncrimped and tidy, good rider bar.
$25
'97 Magura Gustav brakeset minus rotors, adapters to suit Manitou Xvert carbon fork from Palmer edition FSR
$50
Dia Compe levers, look like SS5 but are drilled? Tatty but body would paint up/levers polish up nicely, not gouged or damaged. One return spring seems a bit dicky, haven't pulled apart to check it.
$10
LX M560 calipers with red Ritchey pads, no hardware (e.g no straddles or mounting bolts), need a clean, good condition otherwise, pads near new
$20
31.8 Bottom pull M900 XTR front derailleur, threaded insert for clamp is munted (easily bore out and run a nut and bolt, or re-tap if you're a steady hand)
$20
Magura 6 bolt QR front hub, unknown age, NOS, silver 32h.
$40
Flite reissue, been ridden on for perhaps 2 hours, ti rail, perfect bar slight marring under nose where bike has been hung over ceiling beam
$40SOLD
Continental Montana 26x1.9 pair, NOS, rustwall apparently late 90s? Wire bead, nice and supple casing, should handle being bundled up for shipping, no worries.
$50/pair
Single 26x2.00 IRC Racer-X1 Comp folding 1990s, NOS, tread feels quite fresh, sidewalls have some discolouration but are supple
$30
There is probably more stuff and pics to come.
NOS DX M650 calipers, NO SPRING HARDWARE, suit replacing tatty caliper arms. 3 pads match, one does not.
$Karma
M739 STI, cantilever (may be able to shuffle spacers for V brake?), no indicator windows, missing one cable cover and one shifter barrel adjuster. Shifter units function perfectly, good for spares.
$Karma
M739 derailleur, long cage, anodising crazed on knuckles otherwise in VGC.
$10
Manitou SX-Ti fork, I think its 1997. V-brake arch no canti stop. In good overall condition, firm elastomer stack in good condition, no leaks, stanchions unmarked, only light marks on sliders, damper works as does adjustment, have a heap of NOS damper bits to go with as spares, 200mm aluminium steerer
$100
NOS Right hand (Rear) DX rapidfire 'piano' shifter. NOS except I stole the bolt that mounts the shift pod to the brake lever for my M900. Perfect to replace a sticky shift unit.
$10
Near new 3DV controltech bars, very light marks from fitting/removing controls which are wholly covered by grips, present as NOS with grips and controls fitted, uncut, uncrimped, undamaged.
$40
NOS Kore 120x5 stem, polished, 1-1/4" Threadless, stem drawer damage to decals one letter missing. No packaging.
$30
NOS polished syncros stem, 1" threadless, 150x0. Ignore the handlebar.
$30
Near NOS gray Syncros threadless 1-1/8" stem, 110x15, in original packaging but couple of letters on stem damaged and some signs of fitting.
$30
Black 1-1/8" Syncros Hinged face stem, 130x0 (I think..will confirm)
$20
Silver Taperlite bar, forward facing logos in rough condition, some fading toward ends of bar. Otherwise uncut, uncrimped and tidy, good rider bar.
$25
'97 Magura Gustav brakeset minus rotors, adapters to suit Manitou Xvert carbon fork from Palmer edition FSR
$50
Dia Compe levers, look like SS5 but are drilled? Tatty but body would paint up/levers polish up nicely, not gouged or damaged. One return spring seems a bit dicky, haven't pulled apart to check it.
$10
LX M560 calipers with red Ritchey pads, no hardware (e.g no straddles or mounting bolts), need a clean, good condition otherwise, pads near new
$20
31.8 Bottom pull M900 XTR front derailleur, threaded insert for clamp is munted (easily bore out and run a nut and bolt, or re-tap if you're a steady hand)
$20
Magura 6 bolt QR front hub, unknown age, NOS, silver 32h.
$40
Flite reissue, been ridden on for perhaps 2 hours, ti rail, perfect bar slight marring under nose where bike has been hung over ceiling beam
$40SOLD
Continental Montana 26x1.9 pair, NOS, rustwall apparently late 90s? Wire bead, nice and supple casing, should handle being bundled up for shipping, no worries.
$50/pair
Single 26x2.00 IRC Racer-X1 Comp folding 1990s, NOS, tread feels quite fresh, sidewalls have some discolouration but are supple
$30
There is probably more stuff and pics to come.
